receiver is locked

[kanecorso01]

my receiver is locked and asking for pin how do i fix that

[slowboy]

try 0000 Do You Mean The Ch. Say Locked

[kanecorso01]

as soon as i turn it on it says receiver is locked i tried 0000 it says wrong pin

[EVERLAST]

try 0937 or 3570 that should do the job.

[slowboy]

try This 0937 Or 3570

[kanecorso01]

yes 3570 worked but some channels are missing should i autoscan

[slowboy]

i Would Write Down Your Antenna Setting Than Do A Factory Default 3 Times Than Put Your Setting Back Than Do Auto Scan Good Luck

[tnp12]

not to say slowboys advice is wrong but I factory default as a last resort.
try an autoscan first and load the bin file again and try another one.
if you still are missing channels a default may be your only option.
post back and let us know how you make out.

[edwinsao]

well...when we have missing channels problems for sure we have settings problems,double check your settings,make sure your auto tp is ON,tp freq. and port # are correct,write down your settings,factory reset and do a fresh scan

[EVERLAST]

make sure that your tp freq is 12224 on both 119 is port 1 110 port 2