vs plat 119 help please

[gkopytko]

i havn't been been able to get 119 via vs plat --, so i re did all my cables and hooked it all back up -- powered down reciever etc. i can get 110 perfect, on 119, tp 12239 i get "0" quality .. only when move my tp freq to 12370 i get both Q and S in 70's. also other TP's higher in ladder, so when i do channel scan i only get appr 100 channels. I have save dish hooked up to SV8000 and get both 119 110 prefect. Any advice before i give up as to why cant get any Q? quality . seems like tp12239 does not work on VS but higher TP freq does 12370? thanks to all for this long problem,

[EVERLAST]

ok try these settings 110 lnb power on lnb type ocs-dp lnb freq 11250 22 khz off tp freq 12224 diseq port 2 motor off legasy off 119 lnb power on lnb type ocs-dp lnb freq 11250 22 khz off tp freq 12224 diseq port2 motor off legacysw -none
these are correct settings for dish pro 500

[gkopytko]

thanks for reply everlast -- but i've had problem with no 119 on VS for year. i actually bought new VS disq swith, . i just went up to try ur comments and i had no 119 at all.. even tp 12370 which i had b4 is gone, and all i did was turn off tv and just put back on. least b4 i got something. now nothin, and i did try your comments no luck.... everything sud be fine. maybe lnb is shot on that one side

[Laser2008]

sounds like your lnb is fried. probably the internal switch

[gkopytko]

ahh = i think i figure it out. i turned off / powered off SV on other tv. changed port to 4 and rebooted of VS and it finally worked, i guess i cant have both tv's on same time.. it confusing everything . i hope makes sense, thanks for replys

[EVERLAST]

try what you said get a new lnb then try it should work