receiving signal problem

[nkhall]

viewsat platinum lite, had a storm, was able to default and reload everything, it will not accept or show sat signal, i hooked it to a friends working viewsat and still would not show signal, is the sat in post fried or what

[basscat02]

Do a factory reset. Remember to write down your settings cause you will lose them. Let us know

[drslav]

Originally Posted by nkhall

viewsat platinum lite, had a storm, was able to default and reload everything, it will not accept or show sat signal, i hooked it to a friends working viewsat and still would not show signal, is the sat in post fried or what

did your dish get hit/ maybe lnb is fried try replacing it...

[fred5000]

having same trbl with vs-extreme.....not getting anything > no signal > like box not sending out > and didn't have a storm....,

[drslav]

Originally Posted by fred5000

having same trbl with vs-extreme.....not getting anything > no signal > like box not sending out > and didn't have a storm....,

weird....what is the weather like on location?

[nkhall]

Originally Posted by basscat02

Do a factory reset. Remember to write down your settings cause you will lose them. Let us know

did a factory default, cloned it from a working box, theirs shows signals, mine still don't, someone told me to do a clean file, junk fix, i don't know what that is other that factory default, put in factory bin and load the newest bin, that did not work either

[nkhall]

also, hooked up to a working lnb and it still doesn't show signal

[basscat02]

Switch your LNB out/ change cable wire, check all connections

[nkhall]

Originally Posted by nkhall

did a factory default, cloned it from a working box, theirs shows signals, mine still don't, someone told me to do a clean file, junk fix, i don't know what that is other that factory default, put in factory bin and load the newest bin, that did not work either

Originally Posted by basscat02

Switch your LNB out/ change cable wire, check all connections

just changed out wires, checked lnbs, also did a virgin file,which included a satinfo, chaninfo, and a maininfo, put in the fatory bin, then loaded the newest bin, hooked it up and for a second it flashed a signal, so now i think i need to check my dish to find signal, can you tell me the coordinates for the dish pro

[basscat02]

Not sure what you are asking for, please clarify

[twotiminlamb]

Go to DishPointer.com - Satellite Finder / Dish Alignment Calculator with Google Maps......... This will help you find your numbers for the location in which you live.