need help - ABA DSS

pstrachan · August 25th, 2008

hi this is my frist time posting here, i have a vewsat and i had it huck up to bv and it work find and one day last month it just stop working i change the cable,change the lnb, change the transponder and fique but nothing work i been programing the box for along time and this is the frist time that i can get it to work so if anyone know how to get this work or had this problem befor please help me out
thank

**slowboy** · August 25th, 2008

welcome too abadss hope you enjoy the site ps witch bin or file did you load and did you check your auto roll make sure its on and leave it on one ch for about 5 min. It should work good luck

pstrachan · August 25th, 2008

hi thank for your help i am useing the leatest bin and the atoroll in on.the level is good but there is no quitly

**chill dawg** · August 25th, 2008

Quote:

Originally Posted by pstrachan

hi thank for your help i am useing the leatest bin and the atoroll in on.the level is good but there is no quitly

post your settings especially lnb

pstrachan · August 25th, 2008

sat -nimiq-1.91.0w
lnb type -standed
lnb freq-11250
22khz-off
tp freq-12224
diseq-none
motor -off
leqacy-sw-none

**rajiv427** · August 26th, 2008

Quote:

Originally Posted by pstrachan

sat -nimiq-1.91.0w
lnb type -standed
lnb freq-11250
22khz-off
tp freq-12224
diseq-none
motor -off
leqacy-sw-none

Setting looks good buddy but if no quality then you won't get any picture.

Try to readjust your dish and see if you get the quality back.

pstrachan · August 26th, 2008

i will try that on wednesday when i have time and thank for the help and i will let you know how it went. thank a lot

**slowboy** · August 26th, 2008

i would check your cable ends disconnect them than put them back then try the dish if none i would try CHANGING the lnb good luck

**chill dawg** · August 26th, 2008

Quote:

Originally Posted by pstrachan

sat -nimiq-1.91.0w
lnb type -standed
lnb freq-11250
22khz-off
tp freq-12224
diseq-none
motor -off
leqacy-sw-none

try changing lnb type settings to see which one brings in channels, you didn't say what type lnb you have.

pstrachan · September 2nd, 2008

thank to all that try to help me this is one of the best site and there is alot of help, it took some time but i got it to work i remove the dish from where it was and put in a diffrent place and i got it to pick up the quaility but it not as strong as it us to be i think that after the storm pass i will try to get a better quaility. i live in the bahamas .
i just want to say that i have been to alot of sight and this is the only that help me as fast as you did thank you and i will make this site one of my favorite
thank you all