viewsat update

[thexman1700]

Update:
New Autoroll is tripping up some boxes... If you are having problems, turn receiver off via switch on back, leave off for 30 seconds, turn back on and let it sit, on channel 139. May take up to 10 minutes or so to roll.

On/off switch works for Viewsat.
Sonicview rolled flawlessly!

[carpenter1]

Thanks for the help, trying to get folks to understand it's a glitch.

[thexman1700]

Originally Posted by carpenter1

Thanks for the help, trying to get folks to understand it's a glitch.

thank you sir thats why we are testers
you help me i help you
keep the good testing going

[wilmor]

My viewsat vs2000 platinum working fine. The viewsat roll fine.

[goldenboy]

what bin u have for viewsat.....wilmor

[goldenboy]

anyone help.....i try all the waiting and still not working...please help...thanks

[TuHacABA]

I saw on the other site, they said that change the 5th set of the oo key to DB. I did and it works. My everything up and running almost 2hrs, now.

[goldenboy]

i only have 4 line...which line of key do i need to change...

[huxtable32]

i have viewsat X and had no pic since about 4 00 pm tried the shutdown and went to C 139 and went shopping still nothing any advice DERBY62 or CARP thanks
phila pa 19125

[goldenboy]

can someone tell me how to change key for viewsat..plt..thanks'

[ongmap]

you take opkey and load in will work

[dave delorean]

I have the right keys tried turning it off then on and wait still no E110 or 119,I do have BEV.what do you guys think?thanks

[goldenboy]

where do u get the op key..thanks

[casjl442]

This turning my extreme off on the back for 30 sec. and putting it on channel 139 doesn't work.

[thexman1700]

ok guys i tink for all this turn off for 30 sec. and 139 channel will only work if you have the newes (opkey) loaded in your box and then let it roll iam telling it will work.
good luck guys
and good testing.

[casjl442]

O.K. I have the newest auto roll file loaded from a couple weeks ago.
What's the op key? Is there something else I need to do? I appreciate the help. Have a GREAT weekend.

[thexman1700]

CAN a MODE please post a lank to the newes OPKEY for viewsat x for some members please
thank you.

[derby62]

I dont' know what you guys are doing but I've been running the bin that is in the extreme download section dated 10-7-06 (and it has autoroll) with no problems. Also platinum bin is there. (I didn't seperate them when I posted).Load that bin and put reciever on $ channel and give it a couple minutes and you will have tv.If you change channel and it freezes with no picture there has been a key change, give it time to roll to new keys.Also this bin has opkey so need to download anything else.

[casjl442]

I have the newest extreme bin. What I found out was when I used key ripper to get new keys all the keys rolled ecept for 2 digits on the first line and when I changed those 2 I had tv just fine. It still freezes up a little everyonce in awhile when I change channels.

[85thor]

What works for many is this. Do a Factory Default. Next hook to PC and load the newest factory bin. Then next load the newest Viewsat bin/fix. OK, if you have an updated opkey file might as well load it, too. Setup everything again as to the sats and receiver settings. Maybe also download new guide. This has always given to me a perfect working Viewsat. And be sure to set SID, Auto TP and Auto Roll to ON. The Factory Default helps clean older code out. The Factory bin makes sure the receiver has all the right stuff in all of the right places and the new fix/bin sets up receiver to work with it's fix. I have auto roll, no freezing and a wonderful picture so I know for sure it does work for me.