Should I Move my Dish?

[ragemedia]

I'm currently only getting BEV on my dish... and since its down im wondering if there is going to be a fix out tonight or should i just readjust my dish to get dishnet.

Thanks

[jc7257]

Right now Dik net is up, 30 minutes from now I couldn't tell you. Your guess is good as mine...

[basscat02]

Why not get another dish and have both?

[ryan14]

if it only takes a minute to move your dish move it. I moved mine last night.

[SoDarkTheCon]

Originally Posted by ragemedia

I'm currently only getting BEV on my dish... and since its down im wondering if there is going to be a fix out tonight or should i just readjust my dish to get dishnet.

Thanks

Its always good to have back up plans. just when you set it to 110w. just mark the dish with a marker on your current alignment.

[homerdaisy]

Originally Posted by basscat02

Why not get another dish and have both?

..................or get a motor!!!!

[monoxid]

Hey Ryan
What about software, I'm using an Ultra, is there anything special that needs to be done beside moving the dish.
Thank you
Monoxid

[SoDarkTheCon]

Originally Posted by monoxid

Hey Ryan
What about software, I'm using an Ultra, is there anything special that needs to be done beside moving the dish.
Thank you
Monoxid

no you do not have to change much except the dish pointing. the bins work for both bev and dn. Your not using a diseqc switch. just copy the same settings you have for nimiq 1 91w. both are standard lnb types. both are 12224 tp frequency. lnb power on. all that fun stuff.

use this guide to help you. where it says orbital position change it to 110w. that way you get all the ppv.
SatLex Digital :: Technology :: Calculators :: AZ/EL Calculator

[Boily128]

Originally Posted by ragemedia

I'm currently only getting BEV on my dish... and since its down im wondering if there is going to be a fix out tonight or should i just readjust my dish to get dishnet.

Thanks

Is It possible to set up two dishes to the extreme(one being BEV and DN the other)?????

[SoDarkTheCon]

Originally Posted by Boily128

Is It possible to set up two dishes to the extreme(one being BEV and DN the other)?????

of course you can, you would need a disrqc switch, pretty cheap to buy. when you get it and you have both dishes aligned you'll get both. put one wire from bev lnb to diseqc port 1 and the wire from DN lnb to diseqc port 2 and you'll get both as long as you have a signal for both. when you set up the sats in your menu on the receiver make sure the diseqc tab is correct number.

[gostus]

you can also get a 110 119 bracket, that will allow you to pick up 4 birds with 2 dishes, bracket works for bev and dn