baldy

[len ouellette]

HI EVERYONE ;
I am new at this I have 2 viewsat extreme receivers and this
last ECM only one receiver will work ,, both have exactly the same
setting but one will only auto roll no matter how long I leave it on 200
and the keys are correct ,,, could someone PLEASE tell me how I can correct this ,, Ive tried factory reset but nothing works

sorry for being so long winded

[fernrascal]

load the factory file then reload working bin

[MOE23]

welcome to aba

[tnp12]

signal and quality issues

if you are having problems with signal or quality try these steps:
* do a hard reboot with the switch on back.
* make sure you have the right sat selected in your antenna settings.
* check your antenna settings to be sure they are correct.
* check all your connections including the switch to be sure they are tight and working.
* if your quality is low or 0 you may need to align your dish.
* make sure you have the latest bin file.
* try different lnb types to be sure you have the right one.
* before moving, changing, or disconnecting any cables turn your stb off with the
switch on back.

[nprosper]

seeing you have 2 of the same receivers you can also try doing a receiver upgrade by connecting the good receiver up to your tv. Then connect both receivers up via serial cable and go into your menu and receiver upgrade and upgrade all. This will take everything on your working receiver and transfer it to your bad receiver...in case something went buggy on you.

[len ouellette]

HI nprosper
thanks for the reply it worked perfect I wasn't quite sure how to do that
but I did what you said and bingo .... no more problems ...

[nprosper]

Originally Posted by len ouellette

HI nprosper
thanks for the reply it worked perfect I wasn't quite sure how to do that
but I did what you said and bingo .... no more problems ...

Excellent to hear. Good Job!!