viewsat extrem loader 2 problem - Page 2 - ABA DSS

fix · January 5th, 2008

HI,MARIE.DON't USE THAT 080104X IT WILL FREEZ YOUR BOX

meganjarvis · January 5th, 2008

i have the same problem, when i try and load it says loader error. i did eevrything the same way i did it before but i downloaded a dif bin , i accidently used the vsultra fix and now i cant get my loader to work. what should i do?

sodusme · January 5th, 2008

You could try to re-download loader2 again in case your loader2 file is some how corrupted. Or you can uninstall the com port through device manager restart the computer and have it recognize the com port again. I had a problem one time with loader2 not working turned out to be something the wife had installed on the computer that had conflicted with the com port.

meganjarvis · January 5th, 2008

when i downloaded the ultra fix by accident it worked but when i tried the xtreme thats when it said loader error, so redownloadin or checkin the com port should get it going?

sodusme · January 5th, 2008

Is your receiver working with the wrong bin then or is it flashing ----'s or 0000's? If you loaded the wrong bin on your receiver I would flash the factory extreme bin on your receiver. If the loader won't work to allow you to do that then try to re-download loader2 again and lastly try to remove the com port and reinstall it. But if you haven't already done it I'm sure you're going to have to flash the factory bin on before flashing the extreme file DBPSW-080105X on. You can find the factory bin for extremes under extreme downloads at the top in the stickys.

meganjarvis · January 5th, 2008

the menu came up but no chanels obviuosly and its 000's

digirott · January 5th, 2008

TRy to hit pc to stb first and when its started and is searching THEN turn on the reciever, If you turn the stb on too fast or at exactly the same time they wont always mesh

digirott · January 5th, 2008

Quote:

Originally Posted by meganjarvis

when i downloaded the ultra fix by accident it worked but when i tried the xtreme thats when it said loader error, so redownloadin or checkin the com port should get it going?

try to reflash factory bin(not factory default)no less than 3 times to completely refresh your memory(its the only way I ever hear of working)
then reload your current working bin P.S. READ READ READ the real problem isnt the STB or the .PGF file its the fact YOU loaded it!
Viewsat Extreme bins always end with a X IE

BPSW_080105X.pfg
so in short the best way to protect your investment is to read doc's, dont just assume your good to go because someone said so ,If I had a doller for every sory man thread Ive ever read GOOD LUCK and dont forget READ

**bikerman2_98** · January 24th, 2008

please help, i am trying to enter autoroll into a viewsat extreme and have followed your info, but when i open my loader i getcom port open failed then i go ok and the loader opens , but when i try to transfer the file i also recieve message error in initiaizling i would think i am using the wrong port but i did program it the other day using com 3 and it transfered the file and the box worked but now it wount except files.
also i have using loader 1 and get the message sending file then would close then it says resending
thank you in advance for any help

Roh Lo · January 24th, 2008

hi, try flashing with fac file 131

jojog · January 24th, 2008

lookin for loader 2 exe file

digirott · January 25th, 2008

Quote:

Originally Posted by bikerman2_98

please help, i am trying to enter autoroll into a viewsat extreme and have followed your info, but when i open my loader i getcom port open failed then i go ok and the loader opens , but when i try to transfer the file i also recieve message error in initiaizling i would think i am using the wrong port but i did program it the other day using com 3 and it transfered the file and the box worked but now it wount except files.
also i have using loader 1 and get the message sending file then would close then it says resending
thank you in advance for any help

,

Yup, it sounds like the port settings arent jiving, I cant tell you how to set em but When ever I see this sort of problem I suggest trying it on a Different computer just to see, If it works its the com ports if it dont its in the reciever, Good luck

drama67 · February 1st, 2008

View sat anyone knows where to download it?

**fernrascal** · February 2nd, 2008

go to the download sec for viewsat

tjbichon · February 2nd, 2008

Hi, how do I ''unzip'' a file? And how many files should I end up with when I do unzip it?

tj

6921371 · September 22nd, 2009

i have a problem with mine,but it doesn't allow back on the website.

i made an account,but it says i dont exist.

so now i had make this stupid free account and dont want to pay again if this this is going to happen.

**boboisno1** · September 22nd, 2009

Are you saying you have another account that you made and you can't access it?

Quote:

Originally Posted by 6921371

i have a problem with mine,but it doesn't allow back on the website.

i made an account,but it says i dont exist.

so now i had make this stupid free account and dont want to pay again if this this is going to happen.

funguy69 · September 24th, 2009

I know this is the wrong spot to post this but I don't know how to do it. SORRY

But is Bev ever going to be up again??????????