Viewsat Extreme help

[jefft]

I am in Oklahoma. Flashed my VS with bin 03/03/09 on 3/6/09, autoroll keep going on DN channels with message displayed 60 min + remained, then started another new 60+ min message. I have Dish 500 (pro), both signal and quality indicator are good (85%+). Flashed with factory bin, then re-flashed with 3/3/09 bin, it doesn't help. Anyone has the same issue? Checked with a friend in California, this bin works fine. Please help. Thanks

[bigevil69]

welcome aboard friend
everyone here is willing to help you free
but to get the most out of the best site you will need to
upgrade your membership and you can do that by clicking the link in my signature


delete the copy of the file that you have and download you a fresh copy of the file there could be a slight glitch in the copy you have

[fossil112]

hello and welcome
i'd load the factory file, reboot, then load the latest bin from here. course, you'll need to be VIP, and it's well worth it

[VGiddy]

jefft - There is a new file on site now issued today 090309. Please download that file and load it to your receiver, put the receiver on channel 200 CNN and leave it for keys to roll. May take about 10 minutes.

[boboisno1]

Hello and welcome. If you are looking for international channels they are all scrambled.

[jefft]

Thanks everyone for helping. I will try to flash it with factory bin and reflash it with the latest bin as recommended... Thank you