Need some help!

[robert123]

I can't seem to get the box to work. I've downloaded the new v113 bin and signal is strong. I am suspecting the settings are could be the problem. I've tried changing just about everything in the antenna setting and still no tv. I am only getting channels 100, 101 and 103. I tried using the setup installation instructions on the forum but can't seem to get some settings to work per the instructions. For instance, when selecting LNB type to "standard", it automatically defaults to 110.0W echostar 8/10. I can only do a search using preselected 110,119 echostar 8/10. 7 and LNB type "legacy twin LNB". It appears when changing to "standard" it always reverts to sat 110 echostar and cannot change the Sat and LNB type.
Please help what am i doing wrong.

Setup:
Dish with 2 linear dual lnbf's sharing two receivers with dedicated diseqc switches:
1) Neosat with 4x1 diseqc switch. Port #1 119 & Port #2 to 110.
2) Pansat 2500a conversion with 4x1 diseqc switch. Port #1 and Port #2 110.

My pansat is working perfectly fine.

Any suggestions are greatly appreciated. Thanks.

[arboristman]

hmm interesting.sounds like the neo 1k is a bit different setting up.
well you don't want dish pro nor legacy twin,thats for sure.
you have 2 dual circular lnbs.just fyi.

find a way to set your lnb types to standard or single.and match up the diseqc ports.
as you already know this though lol.hmm,perhaps if you don't get it figured out someone else may come along who has one and can help ya.
keep trying until then.

[aubreydarn]

Originally Posted by robert123

I can't seem to get the box to work. I've downloaded the new v113 bin and signal is strong. I am suspecting the settings are could be the problem. I've tried changing just about everything in the antenna setting and still no tv. I am only getting channels 100, 101 and 103. I tried using the setup installation instructions on the forum but can't seem to get some settings to work per the instructions. For instance, when selecting LNB type to "standard", it automatically defaults to 110.0W echostar 8/10. I can only do a search using preselected 110,119 echostar 8/10. 7 and LNB type "legacy twin LNB". It appears when changing to "standard" it always reverts to sat 110 echostar and cannot change the Sat and LNB type.
Please help what am i doing wrong.

Setup:
Dish with 2 linear dual lnbf's sharing two receivers with dedicated diseqc switches:
1) Neosat with 4x1 diseqc switch. Port #1 119 & Port #2 to 110.
2) Pansat 2500a conversion with 4x1 diseqc switch. Port #1 and Port #2 110.

My pansat is working perfectly fine.

Any suggestions are greatly appreciated. Thanks.

Did you try to manually put in the keys?