please any help with 2010f plus buzz satellite receiver

[salamkuder]

Hi all,
For almost 10 days my 2010f plus model Buzz satellite receiver is down, I have downloaded Oct.23 fix but it did not work, then somebody has posted that I should use new loader (loader 2.04) I also downloaded this loader but I could not extract it. I have used WinZip and also WinRar to extract it but all I got was inexcusable file with an extension RDL. I would appreciate any help to fix this problem.
Thanks

[arboristman]

ok that is NOT a loader.
thats a new boot file.
you load that boot file with your current loader.

remember,when updating boot files.do a factory default.
load factory bin.
open loader and boot file.make sure update boot file (not normal s/w update)
is selected in the loader.-it should default to load as boot when you open the boot file.just make sure it does.

let it load.once its done,leaving the unit on,load the latest current file for your buzz.

[carlos60]

you must wait that the new fix go out

Originally Posted by salamkuder

Hi all,
For almost 10 days my 2010f plus model Buzz satellite receiver is down, I have downloaded Oct.23 fix but it did not work, then somebody has posted that I should use new loader (loader 2.04) I also downloaded this loader but I could not extract it. I have used WinZip and also WinRar to extract it but all I got was inexcusable file with an extension RDL. I would appreciate any help to fix this problem.
Thanks

[salamkuder]

Thanks.
Let me tell you what I exactly did,
1. I downloaded the new boot file.
2. downloading the Oct.23rd bin file.
then, the receiver is on, and all I got is Bell channels but no any dish channel.
You mentioned in your previous reply, After downloading the boot file I should do factory default, I tried this but I got warning says all data will be deleted, Just for double check, do I have to do that after downloading the boot file, then I download the bin file and finally do channel scanning to retrieve all bell and dish channels.
Thanks

[friendlybear]

Now that your Buzz Plus has bootloader 2.04 you can install Sonicview SV-1000 bin V0271-P Only problem, no manual key entry with Buzz remote. Auto rolling fine.