I thought a simple step-by-step set of instructions, with accompanying files and loaders, was needed in order to help people convert to PUFF 1.0.1 regardless of whether you have a brand new box, or if you've already converted to B-75, LZMA, or PUFF...
Note: Using UkRoNiCs BOX Updater.420, UkRoNiCs BOX Updater.421, or BL 1.4 is a matter of choice... Use the one that works best for you!... I found that UkRoNiCs BOX Updater.420 works very well for this whole procedure...
Good Luck!
If your box is brand new out of the box and has never been converted to B-75, LZMA or PUFF... Follow Step 1 and proceed to Step 2...
If your box has already been converted to B-75, LZMA or PUFF and you want to convert to PUFF 1.0.1... Skip Step 1 and go directly to Step 2...
Step 1... Start here if you have a brand new box!
Connect your box to your
PC using a straight thru cable...
Use UkRoNiCs BOX Updater.420...
Load the b75_m 64k boot file...
Set to Bin mode...
Turn on your box and hit the write button...
Do not power off the box!
The box will reboot and will flash b-7-5 b-7-5...
Turn off the box from the back...
Use UkRoNiCs BOX Updater.420...
Load the jvvh_208_1.bin
Set to Bin mode...
Turn on your box and hit the write button when the 1st 'b' appears...
Do not power off the box!
The box will reboot and will flash b-7-5 b-7-5...
The box will stick on 5 for 30-60 seconds, then come ON.
Turn off your box!
Step 2... Start here if your box has already been converted!
This procedure will WIPE CLEAN all of your sat and channel settings...
If you use Channel Master, save you channel list first...
Connect your box to your PC using a straight thru cable...
Use UkRoNiCs BOX Updater.420...
Load the Ukr_PUFF1.0.1_ConvertBOX.bin...
Set to Bin mode...
Turn on your box and hit the write button when the 1st 'b' or 'P' appears...
Do not power off the box!
The box will reboot and will flash P U F F P U F F over and over again...
The rolling P U F F means the box is waiting for a PUFF bin!
You do not need to turn off the box, but no harm done if you do!
Use UkRoNiCs BOX Updater.420...
Load the the
latest PUFF bin from the download section...
Set to Bin mode...
Turn on your box...
Hit the write button when you see 'P'...
Do not power off the box!
The box will reboot and will flash P U F F P U F F twice...
The box will stick on F for 30-60 seconds, then come ON.
If you saved your channel list in CM, you can write them back now!
Turn off the box, connect to your TV, set your language and time settings, select your sats and scan if not using CM, and enjoy!
UkRoNiCs BOX Updaters-420-421.zip
Linear Mode
