PUFF Boot (BG's)VER1.0.3 Lzma

[arboristman]

PUFF_Boot_(BG's)_VER1.0.3_Lzma

--------------------------------------------------------------------------------

These are the same VER1.0.3_Boot files that was

Originally posted to convert receiver to Lzma.
Though "some people" seem to be makeing a big deal about

what is on the display screen when you first turn receiver

ON you just need to know that after using ANY of the

PUFF_Boot_VER1.0.3 boots your receiver is now

converted to Lzma.

So if your receiver displays ( PUFF PUFF ) then you

are to use the PUFF bins ONLY.
If your receiver displays ( P.U.F.F. P.U.F.F. ) with

dots after each letter then you are to use the bins with

(LZMA) in the bin name ONLY.

Just make sure it has for ex.

Jvvh-Team-PUFF_(Lzma)_V207..
(Lzma) is what you look for in the bin name if you used

the PUFF_Boot_VER1.0.2 or VER1.0.3 boot as loading

anything else will get you stuck on " F. " until you load

the proper bin to your receiver.

In the PUFF_Boot_(BG)_VER1.0.3_Lzma zip file

there are 28 VER1.0.3 boots. Again ALL work

the same they ALL have different BackGround

Images when in receivers Main Menu.
If you already converted Lzma using VER1.0.2 or VER1.0.3

boot then loading your new Back Ground is very simple.



Open UkRoNiC's BOX Updater

.421.
File , Choose PUFF_Boot_(BG)_VER1.0.3 .
Turn receiver on " Let Receiver

Fully Boot Up To ON or Channel # ".
Hit Download on Loader.

Write will complete in 10 seconds then receiver will reboot

with P.U.F.F. P.U.F.F. pausing on " F ." for 10 seconds then

come ON.

That is it and if you check Main Menu your receiver

should now have a different Back Ground Image.

If you have not yet used the VER 1.0.2 or VER

1.0.3 boot files to convert to Lzma then you will

have to follow same steps but you will then need to follow it up

with loading a (Lzma) bin to your receiver afterwards

like the Jvvh-Team-PUFF_(Lzma)_V207 bin using the

Loader you normally use to load bins and hitting Download on

Loader when you see the first " P. ".
If you do not follow it up with a Lzma bin your receiver

will be stuck on " F. " until you do.