|
Instruction on how to convert your clone 2700A back to the original 2500A
The following guide and information is provided by chancysand, all credit goes to him.
-------------
This will convert your 2500 converted box back from 2700 box to 2500 again without the use of jtag. All serial loading. Also included my conversion from 2500 to 2700 with transparent background and changed system Info. Incluse also is a FULL JTAG file if you messup.
DO NOT USE IF NOT COMFORTABLE IN JTAGING. AS USUAL GOOD FOR ALL.
Thsi is how to load back to FLU or Pansat 2500 from 2700 Converted Unit via the SERIAL PoRT.
1. Open/Run 1. Open/Run the 2700 to 2500 Loader Converter.exe included.
2. Load the Boot60.bin file included using the timing method by turning off unit and turning it back on and at the first sign of life start the download.
3. Let it reboot by itself and you will see night rider lights. This si all you will see this time and is now safe to load the 294T file.
4. Open/Run the Blacklist updater included
5. Make sure BIN is Selected not BOOT you are writing the X-85BL_070812_294T_api.bin file included.
6. Now let box reboot by itself again and you will see ON in the display window . Now you are back to a 2500 unit again and you will need to load channel list over or scan again. Make sure this time that you use 2500 channel list and not 2700.
This is how to load your 2500,FLU or clone with 29xT (ex 294T) to a 2700 clone via the SERIAL PoRT
********* NOTE NOTE ********
********* NOTE NOT for JTAG NOTE ********
********* NOTE NOTE ********
You will Need a Pansat or Fortec or Hughes remote.
READ your Channel list with Channel MAster and leave open in background.
1. Open/Run the Blacklist updater included
2. Make sure BIN is Selected not BOOT you are writing a Bin
3. Click select BIN
4. Choose j27_205_1.bin
5. Reboot reciever, on first light/dash, Click write bin. let it write
When it is done, Be PATIENT!!!! let it reboot DO NOT TOUCH IT WHEN YOU SEE THE NIGHT RIDER LIGHTS, after 2-3 minutes you will see B-75 Flash on display of reciever. IF YOU REBOOT EARLY YOU WILL HAVE TO JTAG.
6. Click select BIN
7. Choose jvvh_208_1.bin or CS_208T_serial.bin
8. Reboot reciever on first light Click write bin. let it write. let it reboot after 1 minute you will see B-75 Flash on display of reciever.
9. now Rewrite your Channel list back, BUT, BIG BUT, you must now select the 2700 settings in Channel master.
10. reconnect to Tv, select default key from parental options(key menu) let it roll
|