|
Skyview Rx600 new OSD PPV DN only 12-10-07
THE NEW SKYVIEW RX600 FILES FROM NOW ON WILL NEED TO BE UPDATED TO THE NEW
OSD, or else it cant work anymore.
============================================
1. Place your unit in BOOT MODE:
Boot mode: Hold the stand by button on the front of the skyview and
Turn on the power switch from the back on, while holding the
standby button. When you see boot on the front of the unit , stop holding the stand by button.
1. Open the OLD Loader "UpgradeV1.04.exe", and Load "FILE1-RX600_NEW_OSD_12-10-07" file in BOOT mode,
2 Open NEW loader "UpgradeV1.06.exe" Load the new PPV fix "FILE2-SkyviewRX600_PPV fix_12-10-07.bin" file
IN STANDBY mode ---:---.
3. Load the Softcam File "File3-Softcam.bin", USING same NEW LOADER "UpgraderV1.06.exe".
4 Scan your channels and enjoy the new OSD.
Dont FORGET TO PRESS F1 000 To Enable patch like before.
|
Linear Mode
