Skyview RX600 New OSD Upgrade Conversion 12-10-07

[edwinsao]

Skyview RX-600 RX600 New OSD Upgrade Conversion 12-10-07

THE NEW SKYVIEW RX600 FILES FROM NOW ON WILL NEED TO BE UPDATED TO THE NEW OSD, or else it won't work anymore with later bin file fixes.

1. Place your Unit in BOOT MODE: Hold the stand by button on the front of the skyview and Turn on the power switch from the back on, while holding the standby button. When you see boot on the front of the Unit, you can stop holding the stand by button.

2. Open the OLD Loader "UpgradeV1.04.exe", and Load "FILE1-RX600_NEW_OSD_12-10-07" file in BOOT mode.

3. Open NEW loader "UpgradeV1.06.exe" Load the new PPV fix "FILE2-SkyviewRX600_PPV fix_12-10-07.bin" file
IN STANDBY mode ---:---.

4. Load the Softcam File "File3-Softcam.bin", USING same NEW LOADER "UpgraderV1.06.exe".

5. Scan your channels and enjoy the new OSD.

Dont FORGET TO PRESS F1 000 To Enable patch like before.

AND, do not forget to use the NEW LOADER on FUTURE bin file releases.