ABA DSS - Free to Air Satellite TV Community - View Single Post

**edwinsao** · December 6th, 2007

Setting Up The Receiver After The New BIN File Has Been Loaded

1. Go into USER SETUP to set the Time Zone, Date and Curent Time. Use 24 hour time format. It will automaticlly convert to AM/PM. Exit out of User Setup.

2. Go into INSTALLATION.

3. Select ANTENNA SETUP.

4. Check your settings to make sure they have not changed. EXIT out of Antenna Setup going back to the MAIN MENU page.

5. Select Parental Control.

6. Select SECOND pin and enter 0000 if you haven't changed it from the original password.

7. Scroll down and set the Default Key. Exit all the way out.

8. The keys will probably autoroll. When finished, you should have audio and video.

December 6th, 2007	#2 (permalink)
edwinsao Super Moderator Join Date: Dec 2005 Location: canada Posts: 7,104 Credits: 4,895.35 Thanks: 2,357 Thanked 3,777 Times in 1,502 Posts	Re: how to load your 2700 bins Setting Up The Receiver After The New BIN File Has Been Loaded 1. Go into USER SETUP to set the Time Zone, Date and Curent Time. Use 24 hour time format. It will automaticlly convert to AM/PM. Exit out of User Setup. 2. Go into INSTALLATION. 3. Select ANTENNA SETUP. 4. Check your settings to make sure they have not changed. EXIT out of Antenna Setup going back to the MAIN MENU page. 5. Select Parental Control. 6. Select SECOND pin and enter 0000 if you haven't changed it from the original password. 7. Scroll down and set the Default Key. Exit all the way out. 8. The keys will probably autoroll. When finished, you should have audio and video. __________________ Get Credits for ABA stuff in the Arcade!