*********Important boot file update for -PUFF-Ver.1.0.1************
******This is not an everytime use file--more of a system-recovery for your box********
******Think of it as an escape clause--as we are testing new waters anything goes*******
******And of course having a JTAG on hand is a rule of thumb these days********
This is going to now be set as the precident boot file to use for -PUFF- type bins.
The boot-code has been modified (again) to be able to accept
896kb files
NOT TO BE USED WITH 2700A/E Original files
PERIODUnder conditions that the
896kb file has been modded to accomodate our box types.
In other words, we can now
'fake' JTAG the boxes...by that I mean that the box still needs power to use serial port, no power--
need Jtag.
But for the few there have been, and I've done it to myself, wether your stuck on
F (forever) or
knightrider(--------) has you pinned with no way out...
Now we can load a
896k file that overwrites almost all (just enuff to turn back on after) of the flash--returning to an almost factory like state (
similar to default settings but more thorough)
-- It will work as long as your box has power, regardless of what was on it previously.--
****************To Upgrade your Bootfile****************************************** *****-Use the Loader that works for you(and or the UkRoNiCs BOX Updater Ver.421.) when loading BOOT files for the (64kb)-PUFF- Boot Ver.1.0.1.bin
**Box must be ON to the point you have a picture before writing bootfile**
************************************************** *************************************
If you were using -PUFF- prior to the upgrade...you're all done here.
IF not, maybe you had
B-75, or
Lzma, either way to use this now, means
-PUFF- bins--as this code mod has only just been implemented into puff not Lzma or any other for the time being....part of testing means we may have to test some things.
****************Binfiles are done the same way 448k************************************
-again use ur fav. Loader (and or the UkRoNiCs BOX Updater Ver.420.) for uploading bins to your box, again 448k Binfiles...
To
flash a "Recovery" 896kb binfile to your box (whether your stuck ON or F. maybe...or jsut wanna wipeout some old garbage in the flash--A total rescan is required after this!!)
It can work 2 ways,
#1 Your box turns On just fine Pic or no Pic...but is On (Scrambled) even.
--Use UkRoNiCs BOX Updater Ver.421. or the GTRom 27.02 Loader...
add Ukr_258-PUFF-RecoVVry.
BIN 896k, and download.
#2 Your Box has power but are stuck on something for whatever reason...
--Use UkRoNiCs BOX Updater Ver.420. or the BL 1.4 loader works also
and load in Ukr_258-PUFF-RecoVVry.
BIN 896k--Reboot box, and when P or B or ---- rolls hit the write button.
Attached are the Boot/BIN loaders, the Recovery BIN , and the PUFF Ver.1.0.1 bootfile;
Linear Mode
