[REDLIGHTRACER]

Originally Posted by bahamapike

I cloned wrong the first time as well, and almost gave up on it. Cloning should overright anything. Make sure the master is in standby mode and turned on first. Then plug in 444 and the process should take over. Follow these instructions:

8.How to Clone CW600s Box to Box?
================================================== ===

From DigitalPlus:
1) Connect the master and slave box with twist RS232 null modem cable (pin2 to pin3, pin3 to pin2, pin5 to pin5).

2) Start the master receiver and press "POWER" key to make it standby “- - : - -“.

3) Start the slave receiver, in the master box the led will display 'H' and blink it.

4) Input the password:
111 ---- Transfer S/W
222 ---- Transfer data
333 ---- Transfer data, then S/W
444 ---- Copy whole flash except Boot Loader.

5) After finishing inputting the password. Transfer will begin. When it finish, the LED will Display "-End". Disconnect the cable, start your receiver.
Note: By the different password, you can do what ever you want to do for Box to Box.

THANKS FIXED RIGHT AWAY NO MORE RED LIGHT!!!