|
Loader for magnum
1. Connect Magnum to PC with RS232 cable.
2. Pull off the power cord of Magnum.
3. Click "xdown.exe" file of the program.
4. Click "file" and "connect" If you can not click "connect", click " disconnect" and "exit", and then "file" and "connect" to set up Com Port.
5. Click "send " and select a software(bin) file, and click "open".
6. Insert the power cord of Magnum into power outlet.
7. Automatic downloading will be begin and it will load from 1 - 100.
8. Once receiver has loaded 100% it will say flash then GOOD.
9. At that point you can shut off the unit from the back and unplug.
Congratulations you have successfully loaded a magnum
|
Linear Mode
