hello everyone ....

[boybeenbad]

my name is danny ... im new to the site , hope everyone is doing very well and enjoying their fta systems ....

My question is fairly straight forward -- we have two dishes set up , one for the dishnet 110 and 119 , and the second for the bell express 91 . We have untill now only been successful in viewing the dishnet 110 and 119 satellites when conected individually directly to the reciever one at a time ... and for some reason , we cannot watch the 91 ( bell express) at all even when conecting alone and directly to receiver.

We have 2 new diseq c1.2 switches and when we attempt to install 110 in port 4 and 119 in port 1 , and then 91 in port 2 and ofcoarse the reciever ,leaving port 3 empty , we have no success whatsoever on recieving any of the three satellite systems ... all we get is a constant " no lock " after attempting to set all the settings on the "antenna settings area" to what we were told were the propper settings .

Again , we do recieve both 110 and 119 when connecting direct to the reciever just have no luck with usuing the diseq switch --- let me also note that the diseq c1.2 switch is just as its labelled (diseqc1.2) and the reciever only lists settings available for diseq 1.0 / diseq 1.1 ...only those 2 but i have noticed on the motor settings there happens to be a setting for a diseq c1.2 setting .

ANY help would be much appreciated and i thank you very kindly in advance for any assistance you guys can provide to me , Thanks again , Danny ... have a great day all !!!

[bigevil69]

what kind of reeiver do you have and what kind of dish and lnb do you have

[bigevil69]

welcome aboard friend
everyone here is willing to help you free
but to get the most out of the best site you will need to
upgrade your membership and you can do that by clicking the link in my signature

[boybeenbad]

hello , thanks for your reply ... we have the infusion solaris reciever and the dishes are the ones we had used for direct tv in the past , the lnb's i will need to go and check , but the one dish has two lnb's for 110 and 119 and then the second just has one for the 91 - bell exp. , do u need me to check the numbers or code on the lnb's for you to assist further ? thanks again :-)

[cdo_care]

More info is needed so we can help you...Welcome to ABAdss.

[boboisno1]

Hello and welcome. Do you have the dtv dish pointed at 110 and 119? What type of switch do you have?

[buddyjh]

Welcome to aba...you got some of the best there helping you.

[bigevil69]

are they the old single eye lnbs that dtv used

[tb1971]

Welcome to abadss!

[Crystal Dragon]

Hello There & Welcome!!!

[boybeenbad]

i believe they are the old single eye lnb's ... i just went up and checked them ... both dishes are rca direct tv dishes .... on the one for dishnet the 119 lnb is bss 12.2-12.7 mgz /950-1450 mhz .... the 110 lnb zfk-g52n r.f 12.2-12.7 / l.o 11.25ghz /i.f 950-1450 mhz ..... the 2nd dish set up for 91 bell exp. is the same lnb as the 119 above and again both are on direct tv rca dishes ... when i go direct to the reciever from the 110 or the 119 i get service for the dishnet but the 91 dish i cannot get even when going direct ... then when installing any one of the 2 new diseq c1.2 switches i have , none of the three come in , they all show no lock , thanks to you both for your assistance , interest and help :-)

[RICKSBEACH]

and welcome aboard

[bigevil69]

try these settings and see if that is what you have

EchoStar 7 119.0W
LNB Power ON
LNB Type STANDARD
LNB Freq. 11250
22KHz OFF
TP Freq. 12239
Diseqc 1.0 PORT 1
Motor OFF
legacy sw off

EchoStar 6,8 110W
LNB Power ON
LNB Type STANDARD
LNB Freq. 11250
22KHz OFF
TP Freq. 12224
Diseqc 1.0 PORT 4
Motor OFF
legacysw off

[Biged]

Welcome to the site all ways good to hear from a new member so pull up a chair kick your shoes off make your self at home and enjoy your stay with us

[boybeenbad]

hey thanks with those settings i have the 110 and the 119 coming in now but the 91 doesent say no lock , it just says 110 , and i search and recieve channels for 110 and 119 but nothing on the 91 ... also i must ask , we dont get any channels on dishnet , as of today at approx 3pm toronto time all our channels went down on dishnet thru our infusion and now even with the diseq c1.2 switch working for at least the dishnets , i get service not available for all channels , are they working on something thru infusion cause we have no channels coming in whatsover except for their dishnet preview channel ???

[bigevil69]

the 91 dish needs to be tweaked a little

use the dish pointer link in my signature and enter your postal code the choose the nimiq1 91w sat out of the drop down box and find the correct coordinates to point the dish at

[boybeenbad]

will do thanks very much , i still cannot get anything on dishnet except the channel with the previews and any channel with the movie "outlaw josey wales " in different areas but only that movie not one other channel ? do you think its just infusion doing some updates on the net ?

[bigevil69]

could be them doing some updates since most all dn channels are n3 now

[boybeenbad]

Bigevil thanks sooo much for all your help , much appreciated , its very touchy at times this system it seems , at first it said no lock for any of the three again and after 5 minutes of letting if sit , the darn thing started getting recption for all three only problem being as i said the 91 bell express dish still says 110 echost instead on no lock or finding 91 , seems realy weird cause my pal just brought his bell box (legal over 2 days prior and we watched it on that line so i can t figure why it keeps saying 110 .... there is a bell express and dishnet option in the user settings area , does this have any bearing on this issue of what satellite your watching or trying to recieve Bigevil ??? thanks so much again Bigevil for all your help and to everyone else for the welcomeing messages and assistance as well , much appreciated :-)

[bigevil69]

try this for 91w

Nimiq 1 91W
LNB Power ON
LNB Type STANDARD
LNB Freq. 11250
22KHz OFF
TP Freq. 12224
Diseqc 1.0 PORT 2
Motor OFF
legacy sw off