Need some help , HUGE newb . :| - ABA DSS

js-newbie · July 2nd, 2009

This is what i want to get:

- Nfusion HD receiver
- 39" satellite dish
- Dual polarity QPH031 LNB
- SG 2100 Motor
- RG-6 coax cable

Now my question's are .... Will i be able to get an illegal sat hook up with this .. if so how , How do i mod this box ? How often will it go down ? How hard will it be to fix ? How do i go about fixing it ? How to point the sat ? any information is welcome or anything els i need to know to be successful .

Thanks for anyone that is willing to help me with this , trust me it will be really appreciated. One more thing what is N3 and will this affect me . THANKS in advance

**tb1971** · July 2nd, 2009

All the equipment you have will work, and welcome to ABAdss! One thing you will need to do is upgrade your membership to VIP, to receive all files you will need to keep your receiver up and running.

js-newbie · July 2nd, 2009

ok, thanks for replying . whats file do i use to mod my box . is there some huge tut that will explain everything for my and answer all my questions.

**tomcat01** · July 2nd, 2009

first off lets start you can get all the sats that you need but the problem is nfusion HD does not have blind scan and it seemed to me always over shot the position and also did not have a partial degree move (that is probably why it missed the sat) so really it is not a great reciever to use a motor on you will have to spend alot of time to add tp freq to get the free to air sats .. but if you want to use it cool

my suggestion would be hit the arc DEAD ON and if you are off you will have to tweak it bit by bit from out side ..

be nice if they would add a blindscan as i liked the reciever ..

as to mod it you can get the newest file here and hoo up to the ethernet connection and start playing .. good luck alot down but coming up slowly right now

**tomcat01** · July 2nd, 2009

oh to let ya know what i did was the qp031 has 2 cir and linear out put use one 4x4 switch for 1 cir and 1 lin and then do the same again for the other .. then i ran 1 cable to my sv8000HD and one to the nfusion HD then i just used the sv 8000HD to move the dish and added the tps for the free to air in the nfusion after ..

i also have a file here that i already added the tp freq to here it is

http://www.abadss.com/forum/1021-nfu...p-updated.html

yoou could use this and then add more sats and tps as you go .. good luck

**techi2** · July 2nd, 2009

Also spend some time reading in the Newbies section. It will answer most of your questions and save alot of time in the long run.

**Victor Hugo** · July 2nd, 2009

Congratulations on your second post. Keep them coming.

**cdo_care** · July 2nd, 2009

And Welcome to our Site ABAdss.com

**Crystal Dragon** · July 2nd, 2009

Hello There & Welcome!!

**deanluna** · July 2nd, 2009

welcome to aba.,.,there are alot of great helpers here.,.,.,read some of these stickys about your stb.,.,

NFusion HD Help - ABA DSS - Free to Air Satellite TV Community

js-newbie · July 3rd, 2009

Thanks guys , When i first joined this site i thought i would post this and get no reply's , but yes i did get help so i just wana say thanks

,. and i do really like how nice everyone is with the welcoming .. unlike all the other ****y sites i have been on .