factory default

[smcka5]

wanted to watch like everyone else, but when i turned my viewsat extreme on it had no channel on the front screen. had to do a factory default now which bin do i put in and which file do after that, i still have all my settings from before for the anntenna set up. could someone please help

[gibahca]

You should have the latest factory file.
You dont need any new BIN file for that.
I think the gfactory file is v0279.
Rescan 110/119 and stay on channel 200 to get pic

[smcka5]

i tried to rescan and nothing came up i got a signal & quality be no channels came up at all and the screen i check with my neighbour and she is getting everything on dn and i check all the settings with hers everything was exactly the same but still on the front of my vs extreme still said no ch, which file should i put in? is it the last one from june.

[gibahca]

Yep...the one i'm using on my VSmax is from may or June.
try this one http://www.abadss.com/forum/174-view...-dn-r-fix.html

Make sure that you test it on a working channel 200 still open.

[Danv561]

Please reply back if u r up and running if so let us know what u had 2 do so other VS users can enjoy tv again 4 the time being, Thanks

[smcka5]

Sorry i had to find my may file is could not get the one you gave me, i am just setting it back up onto my tv to see if it works i could not find my v0279 bin i hpoe this works. if not where do i get the bin from.

[smcka5]

not working still says no ch on the front of the box

[gibahca]

hey if it says no cha on the receiver screen that means you have no channels scanned.

You'll never get pic without scan the sat.

[gibahca]

To get the files here you need to upgrade to a vip membership right here ABA DSS - Free to Air Satellite TV Community

[smcka5]

how do i scan?
menu> channel scan> then what do i do, what should the sat be on, then what number do i start with

[smcka5]

tried to scan again, nothing, i think is need my settings all looked over, i am not getting any s & q at all i have no idea what freq to have it set at. i have right now epg e:default an n: 12224 i can not even get a guide. can someone help or should i take it in to get a pro to fix it up

[gibahca]

we need to get your dish settings right before scan.

Try go find where you can get the dish settings for 110(echo10,11) and 119(echo7)

and try this setup

119

LNBpower - ON
LNBtype - Single(OCS-DP if you have a DISHpro LNB)
LNBFREQ - 11250
22khz - OFF
Diseqc - port 1
TPfreq - 12239 ( and you prob get S and Q..if not try to get in change the port1 to 2 and...3..4)

110

LNBpower - ON
LNBtype - Single(OCS-DP if you have a DISHpro LNB)
LNBFREQ - 11250
22khz - OFF
Diseqc - port 2
TPfreq - 12224 ( and you prob get S and Q..if not try to get in change the port2 to 1 and...3..4)