need help please (cw 600s premium) - ABA DSS

**dank95123** · September 21st, 2007

i just got a cw600 premium. and im using the 9 pin connector on the back of my computer, but the loader shows options for com 1 com 2, etc.. not sure what to do.. i also tried it with a usb adapter cable and can't figure that out either.. any help would be greatly appreciated.. wanting to get it up and going for the huskers game tomorrow.. thank you

ramblin2208 · September 21st, 2007

Quote:

Originally Posted by dank95123

i just got a cw600 premium. and im using the 9 pin connector on the back of my computer, but the loader shows options for com 1 com 2, etc.. not sure what to do.. i also tried it with a usb adapter cable and can't figure that out either.. any help would be greatly appreciated.. wanting to get it up and going for the huskers game tomorrow.. thank you

com 1 should be your printer port.hook to that.set up loader search for file.mark as app.turn off receiver.hit download then turn receiver on. hope that works for ya

**SatelliteJunkie** · September 21st, 2007

Quote:

Originally Posted by dank95123

i just got a cw600 premium. and im using the 9 pin connector on the back of my computer, but the loader shows options for com 1 com 2, etc.. not sure what to do.. i also tried it with a usb adapter cable and can't figure that out either.. any help would be greatly appreciated.. wanting to get it up and going for the huskers game tomorrow.. thank you

Always use the first available port.
Your pc will automatically default to #1...and so on.
However, if having problems...just try another port to test.

**dank95123** · September 22nd, 2007

are u guys talking about the 9 pin cable or the usb adapter cable? i have 2 different 9 pin connectors on my computer. labeled A and B.. thanks for any help

**coorslightly** · September 22nd, 2007

if you have 2 then one is com 1 and the other is com 2. plug it into com 1 and the loader usually finds the right com and its usually 1. then load your bin.

**Drockstar** · September 22nd, 2007

Connect to A, use Com port 1.... If that don't work you may have to go into the computer's device manager and check to see if the com port has any conflicts...

Win XP: Control Panel, system, hardware, device manager, Ports (Com & LPT)

Close to the same steps for Win 98 and ME.... I think it's Control Panel, System, Device Manager...etc...

**grasshopper** · September 22nd, 2007

Use this to find out which comport available:
http://www.abadss.com/forum/470-fta-...tml#post121977

**dank95123** · September 22nd, 2007

thanks for all your guy's help, but i've tried all the different ports and it still is staying at 0 percent..

**dank95123** · September 22nd, 2007

and 1 more thing.. that program is nice, but when it says "when u see the LED on your reader on u know that it is the right com port" im not using a reader.. it is hooked up right to my receiver, im a little confused there.

**SatelliteJunkie** · September 23rd, 2007

Quote:

Originally Posted by dank95123

are u guys talking about the 9 pin cable or the usb adapter cable? i have 2 different 9 pin connectors on my computer. labeled A and B.. thanks for any help

I'm talking about the 9 pin.
But you know there are 2 different types of Serial Data Cables (9 pin)...1 is Null & the other is Straight...but they look the same.
It won't work if you use the wrong one.
I don't test CW so I'm not sure which one is correct for you...someone else will know.

**arboristman** · September 23rd, 2007

i see you got this loaded ok as per your other thread.

just wanted to mention for other readers here,you must put this unit in boot mode or standby mode before the loader will work.
can read how to in the guides iin the sticky threads in cw 600s receiver help section.