any new bins or help for 2500A - ABA DSS

**vanner63** · January 6th, 2008

hav'in been watching satellite for awhile,all channels gone,is there anything i can do or download to get back working again,i been tring a blind scan but no good,i have a autorole bin,but only get local's channel's,i really thank anyone for the help,

sodusme · January 6th, 2008

There are not more files being released for the 2500 unless you convert it to a 2700 then you want to use JVVH or CS files for you newly converted 2700. Don't just load the newest JVVH or CS bin though without first converting to the b-75 boot file. You should be able to find all the necessary files in the 2500 section.

**vanner63** · January 6th, 2008

thank's for info,but i'am still alittle rusty,can someone give me step by step on witch b75 file is first,then second please,and again,just want to thank everyone for info.....

sodusme · January 6th, 2008

Follow this thread to the T it will help you convert your 2500 to 2700 http://www.abadss.com/forum/124-pans...step-step.html. Just remember though once you convert it you will not use standard 2700 .bin files but will either use a modified file by JVVH or CS and they will be labeled as use for converted 2500. After following the conversion steps you can flash with this .bin which is the newest CS .bin: http://www.abadss.com/forum/162-pans...es_serial.html

danjen · January 6th, 2008

I need the new Bins for my 2700 clone pansat?
Can anyone help me?

**vanner63** · January 8th, 2008

just want to thank you again for info,i followed to the t,but still have problem's,wont autoroll,i also tried to manual set keys,and still no autoroll,i went over an over it again an again,still the same,when i reboot i get b-75,tried to change settings,i spent hours on it,must be on the tip my head,i just cant see it,is there another way or something,can someone please help........thank you....

vanner63....

sodusme · January 8th, 2008

Ok the b-75 scrolling across the display of your 2500 upon reboot is normal that means that the conversion went smoothly. You do have to turn autoroll off and I had to enter my keys manually. Check to make sure you have the right keys it should work. Ohhh just thought of something else....since this is a newly converted 2500 check your antennae settings. I noticed after converting mine that the lnb type had changed as well as some other settings. Go to antennae setup and verify that your lnb and port settings are accurate. I actually did a factory reset on mine finally and just said the hell with it and did a new blind scan.

**storman666** · January 8th, 2008

Quote:

Originally Posted by vanner63

hav'in been watching satellite for awhile,all channels gone,is there anything i can do or download to get back working again,i been tring a blind scan but no good,i have a autorole bin,but only get local's channel's,i really thank anyone for the help,

This isn't a clone is it?

**vanner63** · January 8th, 2008

i have a 2500A non clone,i put in the b-75,to make it a 2700,then a jvvh 208 bin,so iam not sure what i have,since i did this,does this mean i have a cloned 2700.... thanks for reply.....

vanner63....

**vanner63** · January 8th, 2008

just want to thank everyone again for the help,well,i went back and entered keys manual,know iam back where i started from,i have all my and other locals channels,but no other channels,antenna setting looks ok,this is what started before,started loosing channels,then all but locals,what to do what to do,can someone please help..... thanks again.....

vanner63....

sodusme · January 8th, 2008

Ok so you put on the j27_205_1 .bin and then the jvvh_208_1.bin is that correct and that is the last .bin you put on? If it is then you need to do one more step and follow this link: http://www.abadss.com/forum/162-pans...es_serial.html
and put on the latest chancysand .bin then you will most likely need to do a factory reset and rescan your satellites with a blind scan. Put in the new keys and turn off autoroll and you should be good to go. Oh and you now have a "converted 2700" storman means that the 2500 you started with is in fact an original and NOT a clone which you have verified that it is right?

**vanner63** · January 8th, 2008

yes,not a clone,

sodusme · January 8th, 2008

Ok so follow the link that I posted in the last post and put on the newest chancysand .bin which is the newest .bin for your converted 2700.

**vanner63** · January 8th, 2008

i'am freakin back,thank you,thank you,thank you,once i loaded that new cs 235 bin it factory set itself,i had to load my channel list,my list didnt work,so then i did a power scan,i'an freackin up,thank you again,just need to modifiy my channel list,just one more thing,when it goes down,will it autoroll or will i need to enter keys myself,thank's again......

vanner63.....

**vanner63** · January 9th, 2008

just went down,but it autorolled and up again,thank you very much....

vanner63.....

sodusme · January 9th, 2008

Great! Now when you load new .bins in the future remember to always look for the chancysand .bins they start with CS_ OR JVVH_ .bins (which are now done by fwank) either one will work. And yes for some reason even with the autoroll off in the menu it does still autoroll. I've had a couple of instances where the autoroll took too long and I just entered the keys manually but yes it should correct itself.

**vanner63** · January 10th, 2008

oops,i spoke to soon,it worked for a day,its now down,yesterday wnet down acouple times but autorolled back on,its out now and not autorolling,got locals,no other channels,scambled bad channel,not even autorolling,could it need a bin allready,or just the keys,but i still have locals