how to add bev to dish 500 setup

[qwech]

I have a dish 500 set up to get 119 and 110. I want to add another dish to get bev 91. What do i need to run all the birds to one receiver. coolsat 5000.
I already have a 4x1 diseqc and another single lnb dish. I've read the sticky's and am still a little lost on what i need to connect and where.
Thanks

[Apocalypse_67]

Use this setup....



With these settings....

Satellite..............Nimiq 1,3 91.0W
LNB Power..............ON
LNB Type...............Standard (For dish Pro set to OCS)
LNB Freq...............11250
22kHz..................OFF
TP Freq................12224
Diseqc 1.0.............Port 3
Motor..................OFF
Legacy SW..............None

Satellite..............EchoStar 8,10 (110°W)
LNB Power .............ON
LNB Type...............OSC-DP (If you have DP LNB, otherwise set it to STANDARD)
LNB Freq...............11250
22KHz..................OFF
TP Freq................12224
DiESqC 1.0.............Port 2
Motor..................OFF
Legacy SW..............None

Satellite..............Echostar 7 (119°W)
LNB power..............ON
LNB Type...............OSC-DP (If you have DP LNB, otherwise set it to STANDARD)
LNB Freq...............11250
22KHz..................OFF
TP Freq................12239
DiESqC 1.0.............Port 1
Motor..................OFF
Legacy SW..............None

[Beefeater1]

Man that is a great illustration. If you set up the second dish with a single lnb that way it work great, thats my set up and been using it for a couple of years.

Just goes to show pictures are louder than words !!

Beef

[qwech]

So i should connect both sides of my dish 500 lnb to the diseqc? I thought the dish 500 has a built in diseqc.

[Apocalypse_67]

I have mine using both sides of the twin LNB, it works good for me.

[Apocalypse_67]

Originally Posted by Beefeater1

Man that is a great illustration. If you set up the second dish with a single lnb that way it work great, thats my set up and been using it for a couple of years.

Just goes to show pictures are louder than words !!

Beef

No doubt Beef.....

[Beefeater1]

I would not rely on that. If you hook up 119 to port one and 110 on two and 91 on three it works fine.

Then just match those with your V.S ports and of coarse have settings correct it works great.

One thing always seems to work well and keeps everything separate is to once you have all settings and S/Q the best you can, scan each sat individually.

Work for me !!

[qwech]

x2 on the illustration its great
thanks for the help fellers