vs xtreme losing signal... need info

[poorboy_1]

I've been testing my vs for about 3 mo. and had absolutely no problem until last ecm hit. I'm getting great S&Q on 110 but 119 will not lock in steady signal quality. It shows about 78% signal but quality bounces from 0 to 84 and back to 0 again. Tried to tweek but nothing helps. Also changed settings from hi LNB 11250 to 11200 which brings in lower 119 channels and when I go back to 11250 I get most of the other channels. I'm seeing others having similar problems of late but I would appreciate any help that more experienced fta testers can offer.

btw also using dp pro twin... unsure if it is a switch problem or LNB.

[cdo_care]

Originally Posted by poorboy_1

I've been testing my vs for about 3 mo. and had absolutely no problem until last ecm hit. I'm getting great S&Q on 110 but 119 will not lock in steady signal quality. It shows about 78% signal but quality bounces from 0 to 84 and back to 0 again. Tried to tweek but nothing helps. Also changed settings from hi LNB 11250 to 11200 which brings in lower 119 channels and when I go back to 11250 I get most of the other channels. I'm seeing others having similar problems of late but I would appreciate any help that more experienced fta testers can offer.

btw also using dp pro twin... unsure if it is a switch problem or LNB.

Buddy you are not alone. There's some guys has the same problem in VS model. Just hold on the coders are Fixing this Issue. More Bin files are coming, Maybe tomorrow.

[creativegenius]

Check the wiring and connectors on your Desq switch, I'll put $$$ on it that is where the problem lies. But, just in case, what SAT# are you having the signal problem on, you may just have to change your Transponder Freq for that Sat.

Do both of these and report back.

Creative Genius







Creative Genius

[aladin 13]

Originally Posted by poorboy_1

I've been testing my vs for about 3 mo. and had absolutely no problem until last ecm hit. I'm getting great S&Q on 110 but 119 will not lock in steady signal quality. It shows about 78% signal but quality bounces from 0 to 84 and back to 0 again. Tried to tweek but nothing helps. Also changed settings from hi LNB 11250 to 11200 which brings in lower 119 channels and when I go back to 11250 I get most of the other channels. I'm seeing others having similar problems of late but I would appreciate any help that more experienced fta testers can offer.

btw also using dp pro twin... unsure if it is a switch problem or LNB.

i head the same problem and i load the sat inf file you can get them from the file section virgen files load that and the channel inf after that load the lates bin and rescan ...hope that helps it work for me good luck

[poorboy_1]

creative genius- already did both and still no dice... have new cables ith factory ends and all are tight....
I'm having problems with the 119, TP always goes back to 12224 reguardless where I put it.

thanks

[poorboy_1]

Originally Posted by aladin 13

i head the same problem and i load the sat inf file you can get them from the file section virgen files load that and the channel inf after that load the lates bin and rescan ...hope that helps it work for me good luck

aladin 13- took your advice and it worked like a charm... still have no quality showing up in the setup mode but a good showing in the operation mode .
thanks for the excellent advice!
poorboy_1

[poorboy_1]

Originally Posted by poorboy_1

aladin 13- took your advice and it worked like a charm... still have no quality showing up in the setup mode but a good showing in the operation mode .
thanks for the excellent advice!
poorboy_1

as always, best info site on the web.
once again, money well spent with no regrets

[poorboy_1]

didn't mean to answer my own quote ...lol