help not getting 119

[huasteco]

i need help gettting signal at 119 i had it before working but 2 days ago im only watching channels that gets only 110, but not 119. im using a dishpro hitting 119 and 110 using a vsxtream & 600 premium and when i put it on sat. settings on both finds only 110 not 119

[Apocalypse_67]

Check your ports. 119 should be port 1 and 110 should be port 2

[huasteco]

i have them righ

[Apocalypse_67]

What type of LNB/s do you have?

[huasteco]

dish plus with lnb's twiw i think

[Apocalypse_67]

Try swaping the ports.. 110W port 1 and 119W port 2
Also make sure the TP Freq on 119W is set at 12239

[huasteco]

ok it works on 11o port 1, but on 119 port it says found echosar 110 sted of finding 119 and i dit like you said

[Apocalypse_67]

The internal switch on your LNB might be stuck. If you have a D!SEqC switch you can try this setup..



But before you do that, try re-aligning your dish. It might have moved a little and lost the 119W focal point.

[jayjay1972]

also check the external switch if your using one. just move the 119 cable to #3 #4 and make the adjustment in your settings

[huasteco]

ok, but i notice something that when i change the ports on 119 you told me to chage t0 12239 and i exit it and save it . when i put it back it came back to12224

[Apocalypse_67]

Yes, its going to do that since its not locking on the 119 signal.

[huasteco]

thank you guys i will try those steps to see if i can get it to work

[Beefeater1]

Originally Posted by huasteco

ok, but i notice something that when i change the ports on 119 you told me to chage t0 12239 and i exit it and save it . when i put it back it came back to12224

That is normal, when you scan on 119 use 12239 but every time you check the tp once scanning is done it will automatically default back to 12224.

Just telling you this so you know that is not your problem.

Beef

[jcp0563]

i also had the same problem with 119 at first i changed the frequency to 11.225 it worked maybe thatll help

[huasteco]

and it did work ha . i'm sorry that i didn't answer quick i was out there changing the switch.

[huasteco]

hey apocalype i try everything you tol me.i change it the switch i try with the lnb's and is still doing the samething .i run to another problem when i moved the tp. freq. on each satellite if move the 119 it find it go the 110 it find the same one119 if i do the opposite it will find the 110 and either way i doit first i'm only will be able watch channels of only either one sat.