- - - - is all i get after latest fix

[paul_dem]

hey guys, headline prettyy much says it all. it froze while uploading the latest .pgm via usb and sat there for half hour waiting. turned it off (switch on back) then turned it back on after a couple of mins. now it wont go past ( - - - - ) on the display of the box and nothing on the tv. i know i have seen a post about this before, and searched rigorously before starting the thread with no luck.

any help is greatly appreciated

[boboisno1]

You can try the "Fail Fix" method or try loading factory file 119 or 131 using the serial cable. Check the ultra "General Help" section, you will see a few threads on this problem.

[monoxid]

Originally Posted by paul_dem

hey guys, headline prettyy much says it all. it froze while uploading the latest .pgm via usb and sat there for half hour waiting. turned it off (switch on back) then turned it back on after a couple of mins. now it wont go past ( - - - - ) on the display of the box and nothing on the tv. i know i have seen a post about this before, and searched rigorously before starting the thread with no luck.

any help is greatly appreciated

Read the very first post ( my Ultra is dead), all the instruction are there for the same problem.

Hope this helps you.

[tomcat01]

a guy here in my town is bringing me a ultra vs with a ---- problem he can't get it going i will fix and post how to do it after step by step .. he should be here in 20 min ..

[woodcreeker]

Loader2, null modem cable and load VIEWSAT_ULTRA_V131.pgm tomcat01

Works slick !!

Then use the USB Drive for the latest file.

Good Luck !!

[monoxid]

We're looking forward to that, may be make it a sticky would be good.

[tomcat01]

come on guys took me 5 seconds to fix this i just took loader 2 and the main.pg file loaded it then it got stuck on end then shut off loaded the main again went to no channel then loaded new bin and was watching .. boom done..