help with my antenna

[manuel30]

hi, i had a little problem with my antenna, i trying to install it and got 80%to 90% signal on 119 satellite,then i change to 110 i got 0% how i do da to get signal on both satellite,can someone help plis, i lives at north dallas thanks.......

[Apocalypse_67]

Once you get strong Quality on 119W, just Skew your dish a little to get 110W
Make sure your antena settings are correct.

SATELLITE............Echo 8,10 110W
LNB POWER.........On
LNB TYPE.............Standard (OCS-DP if using DP LNBs)
LNB FREQ.............11250
22KHz...................Off
TP FREQ...............12224
DISEqC1.0..............Port 2
MOTOR..................Off
LEGACY SW..........None

SATELLITE............Echo 7 119W
LNB POWER.........On
LNB TYPE.............Standard (OCS-DP if using DP LNBs)
LNB FREQ.............11250
22KHz...................Off
TP FREQ...............12239
DISEqC1.0..............Port 1
MOTOR..................Off
LEGACY SW..........None

[hazwis]

apoc is correct. check your settings.
is this a new install.
signal is less important than quality, make sure your dish is pointed correctly and your settings are correct.

[manuel30]

Originally Posted by hazwis

apoc is correct. check your settings.
is this a new install.
signal is less important than quality, make sure your dish is pointed correctly and your settings are correct.

all my setting they exactely like that and my quality is 80% and i getting some channels 7 110 but nothing on 6.8 119

[Apocalypse_67]

When you scan the sats, how many channels do you get??
BTW, what receiver are you using??

[alandon64]

HI: I need help to setup my 61.5,I get 96% level but the qulity jume from 7-15%
i try move it around but no do cs6000. thank you.let me know what can i do
dp44 sw

[jayjay1972]

sounds like you might not be aimed right. What dish are you using and is it running straight or do you have a switch?

[jayjay1972]

Originally Posted by alandon64

HI: I need help to setup my 61.5,I get 96% level but the qulity jume from 7-15%
i try move it around but no do cs6000. thank you.let me know what can i do
dp44 sw

alandon your hijacking this thread please start your own

[alandon64]

HI:I AM in ocala fl. sat 61.5 have swtich dp44 elevation is 51 skew is on 90 and level 96% &qulity 5to15% .I have a coolsat 6000.need help to line in up when i move it the level&qulity drop.thank you.

[alandon64]

I am sorry i am new at this.

[manuel30]

Originally Posted by hazwis

apoc is correct. check your settings.
is this a new install.
signal is less important than quality, make sure your dish is pointed correctly and your settings are correct.

Originally Posted by Apocalypse_67

When you scan the sats, how many channels do you get??
BTW, what receiver are you using??

im using sonicview sv4000 and getting all the channels of whatever satellite had on dish setting 7 or 6.8

[hazwis]

alan, you need to start another post, your not supposed to hijack the one started at the top.

[alandon64]

Originally Posted by alandon64

HI:I AM in ocala fl. sat 61.5 have swtich dp44 elevation is 51 skew is on 90 and level 96% &qulity 5to15% .I have a coolsat 6000.need help to line in up when i move it the level&qulity drop.thank you.

i am use a500 dish with single lnb

[baron1]

Originally Posted by manuel30

all my setting they exactely like that and my quality is 80% and i getting some channels 7 110 but nothing on 6.8 119

echo 8(110)
echo 7(119)
i beleive you have them listed backward don't know if that is what wrong or if a typo

[manuel30]

Originally Posted by manuel30

all my setting they exactely like that and my quality is 80% and i getting some channels 7 110 but nothing on 6.8 119

i'm using sonicview sv4000 and i getting all the channels of whatever satellite i had on dish setting page 7 or 6.8,if i got it on 119 i getting all those channels, or 110