Looking for installer Brampton Ontario

[pyroz]

Looking for an installer in Brampton Ontario to aim an eliptical dish

[boboisno1]

Hello and welcome. If you have troubles finding someone we can probably talk you through it.

[cisco123]

welcome . give it a shot the more ya learn the better off you will be.

[dirtywill2001]

the first ones always the toughest...just dont get discouraged. there is much more satisfaction when you do it yourself.

[bill of oz]

i sent you a PM

[lonster]

Welcome to ABA....

You can handle it pyros.

Check out this link..... Satellite Finder / Dish Pointing Calculator with Google Maps | DishPointer.com It will help you get going.

[gibahca]

Welcome to ABA.

I can give to you a cel phone from the guy who did to me when i bought my vspro.
But it happens before find ABA.
After that i did my own elliptical installation and it works fine.
Give it a try.Ask here first how to.
:

[Landscapeman]

Once you figure it out it really simple. Just take your time, set the elevation and then the skew. Then take your time moving slowly to lock on. Use Satellite Finder / Dish Pointing Calculator with Google Maps | DishPointer.com to get the info and basic direction for the install.

[pyroz]

Thanks all for the welcome.. ... So after many days.. I managed to get a signal on 110 and a little on 119.. Its an elliptical dish with a 4 lnb bracket.. 110 119 101 91..

So.. now that im in the general area.. how do i go about fine tuning?..
Should I adjust skew first? or elevation first?? which is best way to go.. or.. do I just pick one and go a degree or 2 in whichever direction and see how it affects the signal..??

[cisco123]

do you have signal and Qua. ?or just signal

[pyroz]

I have signal and Qua.... about 50 for 110.. (just looking now) and less for 119..

[cisco123]

if you can just study on 110 and get the qua. up then focus on 119

[dirtywill2001]

just focus on one at a time...starting w/ 110 as cisco123 said. once you get it as high as you possibly can the rest is just a skew away. just make sure your mast is absolutely plumb...if not you will have one heck of a time.

[pyroz]

Ye I spent lots of time plumbing the mast.. anyways.. 110 80+Sis and Qua.....119 50+Sis no Qua.. 91 70 Sig 40 Qua.. roughly anyways..

Trying to figure out why I cant seem to get anything with 119... Im thinking either bad cable or bad lnb.. I may switch out the 91 and 119 lnb's to see what happens.. any thoughts??

[dirtywill2001]

if your getting quality on 110 and 91 you must be getting close. what transponder are you using for quality for 119? dn uses transponder 1 (12224) as a spotbeam, unless you are in that spotbeam you will get no quality. try 12239 and see what your quality is.

[pyroz]

12224 for both 110 and 91.. and 12239 for 119.. if I use 12224 for 119 it shows echo..8/10 110 in the top of the screen.. (viewsat 2000 ultra)

[cdo_care]

Originally Posted by pyroz

12224 for both 110 and 91.. and 12239 for 119.. if I use 12224 for 119 it shows echo..8/10 110 in the top of the screen.. (viewsat 2000 ultra)

Meaning you are getting 110W not 119. BTW are you using any switch in this?

[pyroz]

ye.. the diseqc that came with my viewsat.. 119 on port1 110 port 2 and 91 on port3

[pyroz]

err.. is it possible Im gettin 110 on both lnb's ???

[dirtywill2001]

and i take it in your antenna setup you have 119 set for lnb1, 110 for lnb2, and 91 for lnb3?
what kind of lnb's do you have...post your settings, this may help us out.