nfusion

[angelbaby29]

Hi there,
Can somone help i have a nufsion just flashed the new bin file via serial cable but now all i get is a red light on the reciever no channel numbers just a red light

[chill dawg]

Originally Posted by angelbaby29

Hi there,
Can somone help i have a nufsion just flashed the new bin file via serial cable but now all i get is a red light on the reciever no channel numbers just a red light

Have installed the antenna settings for the birds you want and did you do a channel scan.

[angelbaby29]

nothing will come up on the reciever no minue guide this all happined when i tried to up date the new bin file . is there some way to reset the unit via front pannel

[angelbaby29]

have not had tv for weeks do not know the proper procedure to load the nessary files for the nfusion reciever , but have all the files down loaded and i load them via serial cable thanks any help would be great

[shery20]

you have to rescan the sat settings

[chill dawg]

Originally Posted by angelbaby29

nothing will come up on the reciever no minue guide this all happined when i tried to up date the new bin file . is there some way to reset the unit via front pannel

if you can get to the menu do a factory default. if you can't then reload via null modem cable.

[angelbaby29]

cannot get to the menue of reciever to due a factory reset also tried to reload the factory bin no luck

[angelbaby29]

is there some procrdure to load the unit back to factory default

[chiswood]

angel i d/l 148 a few days ago and at the end of the update it took about 30 seconds with just the light on display before clock appeared ,before i turned off box.Did you turn off box after d/l with just the light showing on display ?

[angelbaby29]

cannot get to the menu of reciever to due a factory reset also tried to reload the factory BIN no luck

[Beefeater1]

Originally Posted by angelbaby29

cannot get to the menu of reciever to due a factory reset also tried to reload the factory BIN no luck

This is a c/p from buffman a few days ago that seemed to work.

turn power "off" in the back , press and hold the channel "up" button on front , turn power "on" hold Channel button for 30 sec's , turn power "off" release channel , re-load u27 in "Main" , then Boot 1.30 in "Boot", and 1.47t in "Main

[angelbaby29]

after i loaded the new bin via up loader through my serial cable th unit said new up then i switched the unit off on the back hoooked it up to the dish lef the unit on for 10 min and still only the red light cannot get to the reciever menu
do you know the proper files and procedure to load the may i am loading the files wrong

[Beefeater1]

Originally Posted by Beefeater1

This is a c/p from buffman a few days ago that seemed to work.

turn power "off" in the back , press and hold the channel "up" button on front , turn power "on" hold Channel button for 30 sec's , turn power "off" release channel , re-load u27 in "Main" , then Boot 1.30 in "Boot", and 1.47t in "Main

In this case load 1.48 last.

gl