nimiq

[mr.jeyruiz]

i have a dish500 my setting are echostar.7 my S82 n Q75
lnb power-on
lnb type-standard
lnb freq.-11250
22khz-off
tp freq-1224
diseqc-port1
motor-off
legacy sw-none
i keep seening on the top corner nimiq 1,3 91.0w (is that why is not working?)

[cisco123]

Originally Posted by mr.jeyruiz

i have a dish500 my setting are echostar.7 my S82 n Q75
lnb power-on
lnb type-STANARD
lnb freq.-11250
22khz-off
tp freq-1224
diseqc-port1
motor-off
legacy sw-none
i keep seening on the top corner nimiq 1,3 91.0w (is that why is not working?)

what type of lnb ya got you got it at stanard?
Satellite 110 - Echostar 8,10 or (6,8)

LNB power----------- on
LNB Type------------ OCS-DP
LNB Freq------------- 11250
Transponder--------- 12224
22KHz--------------- Off
Search Option-------- all
Network search------ on
DiseqC-------------- Port 2
Motor--------------- off
Legacy switch------- off

Satellite 119 - Echostar 7

LNB power----------- on
LNB Type------------ OCS-DP
LNB Freq------------- 11250
Transponder--------- 12224
22KHz--------------- Off
Search Option-------- all
Network search------ on
DiseqC-------------- Port 1
Motor--------------- off
Legacy switch------- off

[jayjay1972]

your aimed wrong echo 7 is 119 so if its showing 91 your gonna have to turn your dish. If your looking to test 91 then exit the echo 7 and find nimiq 1,3 and the settings are pretty much the same as dn settings (freq 11250, trans 12224). Do a regular scan and and wait for it to roll.

[bill of oz]

your dish is aimed at 91W if thats what its showing.....your nowhere near 119W....you have to go west (quite a bit) and down

[mr.jeyruiz]

if i get echostar7 well it show on the top and why does the single pick up for nimiq even if i have echostar for satellite...are my setting okay

[wayne5222]

Although you picked echostar7 , your dish is pointed to Nimiq1-91 so that is the one you have to pick in setup, unless U move your dish and point it at echo7

[mr.jeyruiz]

when i move my dish well it say echostar7 whats the best echostar or nimiq?

[wayne5222]

well if I where U I would leave it on Nimiq1 for now and scan for channels and watch TV nimiq1 has more channels and has more Canadian content. you can always change later

[cisco123]

the one you are aimed at has 450 plus channles

[wayne5222]

You would have move the dish and adjust the elevation as well. and yes when you have it pointed right it would tell that it locked on echostar7 or what ever you are pointed at

[wayne5222]

Originally Posted by cisco123

the one you are aimed at has 450 plus channles

Hey cisco I really, really like your pointers

[mr.jeyruiz]

when i go to auto scan for nimiq1,3 or nimiq2 the q drops are my setteing rite for nimiq

[wayne5222]