no signal coming and going

[golake]

hi guys i have a vs 7000 i have strange problem i loose my signal very offen and i have tried everything changed my lnb and put new ones changed my switch tried regular,dp,dp40 with power but not geting any signals i m sure my dish is pointing right way so please help to short this problem

[cisco123]

hello and welcome to aba.
go to your settings
If sat # does not match with the one you are setting up in upper right hand corner in your settings check your settings then adjust if needed.

[tnp12]

signal and quality issues


if you are having problems with signal or quality try these steps:

* do a hard reboot with the switch on back.
* make sure you have the right sat selected in your antenna settings.
* check your antenna settings to be sure they are correct.
* check all your connections including the switch to be sure they are tight and working.
* if your quality is low or 0 you may need to align your dish.
* make sure you have the latest bin file.
* try different lnb types to be sure you have the right one.
* before moving, changing, or disconnecting any cables turn your stb off with the
switch on back.

[golake]

i tried ever thing but still same problem help please i can not figure this out