ABA DSS - Free to Air Satellite TV Community - View Single Post

jazzwin_21 · February 15th, 2008

Here, below is a guide from me that tells you on how to manually enter keys on a CW-600s Reg.
1>Go to main menu. 2>Scroll to SYSTEM SETTINGS. 3>Scroll to OSD.
4>Scroll down to the bottom, and turn auto roll to off. 5>Now exit everything
5>Go back to menu and scroll down and select accessories. 6>scroll down to KEYS and select it. 7> Now you are at the key menu. 8>Press the left arrow on the remote and now you are at NAGRA2. 9>for Bell, scroll down to BEV and enter the keys. *For the index, here is an example, for the index '86' on BEV is '00'.
*For the index '96' on BEV is '01'
*Same thing for Di$h. 10> You are done.

WARNING: USE THESE INSTRUCTIONS AT YOUR OWN RISK!

*Manually entering keys usually does not work.

February 15th, 2008	#2 (permalink)
jazzwin_21 FTA Newbie Join Date: Feb 2008 Location: Where I usually live. Posts: 24 Credits: 56.90 Thanks: 23 Thanked 2 Times in 1 Post	A Guide of how to manually enter keys. Here, below is a guide from me that tells you on how to manually enter keys on a CW-600s Reg. 1>Go to main menu. 2>Scroll to SYSTEM SETTINGS. 3>Scroll to OSD. 4>Scroll down to the bottom, and turn auto roll to off. 5>Now exit everything 5>Go back to menu and scroll down and select accessories. 6>scroll down to KEYS and select it. 7> Now you are at the key menu. 8>Press the left arrow on the remote and now you are at NAGRA2. 9>for Bell, scroll down to BEV and enter the keys. For the index, here is an example, for the index '86' on BEV is '00'. For the index '96' on BEV is '01' Same thing for Di$h. 10> You are done. WARNING: USE THESE INSTRUCTIONS AT YOUR OWN RISK! Manually entering keys usually does not work.