Need Help on signal and quality strength!!

[richielira]

The signal shows at 96% and 0 quality. but no matter where i point the dish its always 96% and 0 quality!!! Is there something wrong with the dish or lnb??? i have tryed two diff. dishes with two diff. lnbs, and still no change!!! please help asap!!! i am new to this, just got my viewsat maxhd two days ago and cant get this to work!!!

thank you...

[ccelectro]

What are your settings, lnb type, receiver type, sat you are pointed at?

[VGiddy]

Signal indicates that the LNB is communicating with your receiver. Quality represents the strength of your communication with the satellite.

So if your S = 96%, then the LNB is good and communicating with the receiver, and S= 0% meanns that you have not hit the satellite. So you need to get the correct co-ordinates for your area and adjust the dish to those figures.

Please note that the markings on the dish are not accurate and will be either a little more or less than indicated on the dish.

[painterguy14]

Hello & Welcome to Aba!!!!!! As ccelecrto stated we need more info from you to get you going

[creativegenius]

This will likely help you:

http://www.abadss.com/forum/1012-dis...-pointing.html

Creative Genius

[richielira]

lnb type is dishnetwork 500 pro plus. i dont know where to point the dish or find quality

[VGiddy]

Give us your Zip code to tell you where to point.