DP Plus question - ABA DSS

**tb1971** · June 13th, 2009

Never seen one of these, has 2 outputs on one side and 1 output on the otherside. Can someone explain?

**bigevil69** · June 13th, 2009

that is a dishpro plus lnb
the 2 ports on one side go out to receivers
the 1 port on the other side is an in port that you can hook another dp single lnb to without having to have a switch

setup would be for example

disq 1 119
disq 2 110
disq 3 129/91/or whatever other sat you are pointed at

**tb1971** · June 13th, 2009

Ok..BigE thanks buddy, let me give you the scenario...im going to use this lnb tomorrow and aim only at 61.5/echo3, going to one reciever. Can you fill in the blanks for me?

**bigevil69** · June 13th, 2009

are you hooking it to a disq switch or just running straight to receiver

**tb1971** · June 13th, 2009

Straight to receiver.

**slowboy** · June 13th, 2009

yes it will work that my set up

**bigevil69** · June 13th, 2009

if you just want 61.5 then run 1 cable from one of the 2 ports that are side by side then just point

i would try to get it set up on the 119 side of the lnb

if i remember correctly the lnb is labeled like the dp lnbs with 119 on one side and 110 on the other side molded in the plastic and setup using disq 1

**tb1971** · June 13th, 2009

if you just want 61.5 then run 1 cable from one of the 2 ports that are side by side then just point

i would try to get it set up on the 119 side of the lnb:why would I need to do this?

if i remember correctly the LNB is labeled like the dp lnbs with 119 on one side and 110 on the other side molded in the plastic yes thats exactly the way it is. and setup using disq 1nly if im going to try for 119 and 61.5...right?

**bigevil69** · June 13th, 2009

that lnb will never span the distance between 61.5 and 119

what i was saying is use the side that is labeled 119 as the primary lnb to point

just like setting up for 119/110 you pick one sat to point at then skew for the other but for just 61.5 you will not have to skew to another sat

**tb1971** · June 13th, 2009

Cool, thanks BigE, thats what I was thinking, just wanted to have all my ducks in a row before I aimed. This is all for the ufc fight tomorrow...lol...You gonna watch the fight tomorrow?

**slowboy** · June 13th, 2009

ps tb1971 it works real easy when you change the tp freq. # to 12384 on the antenna set up good luck

**bigevil69** · June 13th, 2009

yeah it will be on the big screen at the club

**tb1971** · June 13th, 2009

Quote:

Originally Posted by slowboy

ps tb1971 it works real easy when you change the tp freq. # to 12384 on the antenna set up good luck

Yeah I saw your post earlier in a different thread that Ed started and saw his and your posts on tp12384..Thanks buddy!

basscat02 · June 13th, 2009

I explained it to you the other night when you were fighting with BEV. Use your Dish 500 to get 119/110. Both wires carry the 2 sats if you want to have more than one setup. Then, take a small cheap 18 inch dish, find BEV, run the wire to the single outpost on the 500. Then the single wire will carry your 3 sats to the house

**tb1971** · June 13th, 2009

MY cousin has a 18 dish on a tripod, so im going to use that for 61.5, much easier.