What's the use of LNB-IN of dish 1000.2? - ABA DSS

SimpleOne · June 17th, 2009

I have dish 1000.2 for a while now, but keep wondering what is the purpose of the LNB-IN port (4th port) of the LNB, and how can I make use of it? Anyone has trying using it for whatever purpose?

**bigevil69** · June 17th, 2009

it is so you canpoint another dish with a dp lnb on it to another sat and hokk it into the 1000.2 and use it without an external disq switch

SimpleOne · June 17th, 2009

Then what do I have to do during channel setup? For example, I currently set port1 for 119, port2 for 110 and port 3 for 129. If my another dish (say dish 500) is pointing to sat 61, which port to set to on the receiver? thnx,

**bigevil69** · June 17th, 2009

it would be port 4

SimpleOne · June 17th, 2009

Thanks a lot Bigevil. Which one do you recommend between 61.5w and 91w, or ?? I have SV with ihub.

**myxlplk009** · June 17th, 2009

Quote:

Originally Posted by SimpleOne

Thanks a lot Bigevil. Which one do you recommend between 61.5w and 91w, or ?? I have SV with ihub.

go with 91w

**bigevil69** · June 17th, 2009

depends on what you want and which sv you have

SimpleOne · June 17th, 2009

Thanks myxlplk.

I have both SV 360P and SV 8000.

**RICKSBEACH** · June 17th, 2009

what about 82 and 91 on a dish 500?

**RICKSBEACH** · June 17th, 2009

I'm not sure if you can go with 82, 91 on the extra lnb..
how would you hitch that up bige?
any idea's?

SimpleOne · June 17th, 2009

It would be great if I can hitch both sats. The reason I asked about 61 because lyngsat shows that the channels are still on n2. Or, it's just a matter of time? If ihub can handle bev well, then I am all for it. thnx,

**bigevil69** · June 17th, 2009

this is the best set-up but i could come up with anoth way if you need