On my dpp44....

[ogzer707]

I have a dish 1000.2(110,119,129)and a dish 500(82,91). all dpp. running to a dpp44. My question is do I need another switch(sw22 or sw21) to have all 5 sats running off my four port dpp44? Or can I have one cable from my dish 500 to port 4 and be running both 82 and 91 on a single port???
Thank you

[jc7257]

Hook the Dish 500 to LNB port in on 1000.2 dish. Then define in settings as 82 as port 4 and 91 as port 5. This way you will have just one cable to run into house...

[jose2001]

dish 500 will be the bess onen for you

[ogzer707]

Originally Posted by jc7257

Hook the Dish 500 to LNB port in on 1000.2 dish. Then define in settings as 82 as port 4 and 91 as port 5. This way you will have just one cable to run into house...

So your saying i can keep the 1000.2 running to my dpp44 and run my dish 500 cable to my 1000.2 in port?
My nfusionHD doesnt have port 5 option. It only goes to four under diseqc1.0 setting

[sam008]

I don't think you can do that... I have same setup... run dish 1000+ to DPP44.

just select one of the 2 Sat from Dish 500 & add that to DPP44.

[dirtywill2001]

the dpp44 overides the internal diseq of the lnb's. you could hook 91 to port 4 and get a 22khz switch. hook the output of the dpp44 to one side of the 22 khz switch and hook 82 to the other side of it and run the out to the receiver. for 82 your setting would be 22khz on, port 1

[ogzer707]

Originally Posted by dirtywill2001

the dpp44 overides the internal diseq of the lnb's. you could hook 91 to port 4 and get a 22khz switch. hook the output of the dpp44 to one side of the 22 khz switch and hook 82 to the other side of it and run the out to the receiver. for 82 your setting would be 22khz on, port 1

As of now i have 82 to port 4 and 91 to my switch how you describe(22khz on) then from there to my reciever. and a lil jumper from port 2 (receiver side of dpp44)to the 0khz side of ecoda sw. but im not scanning any channels on 91.well i am but not actually getting any of them. I want the stronger signal to be on 82 for hd purposes.

Originally Posted by sam008

I don't think you can do that... I have same setup... run dish 1000+ to DPP44.

just select one of the 2 Sat from Dish 500 & add that to DPP44.

So u have my same setup working this way? and you get both 82 and 91 working like this? i read it should work since its all dpp it doesnt change the internal diseqc settings. but it just didnt sound right.

[ogzer707]

Originally Posted by dirtywill2001

the dpp44 overides the internal diseq of the lnb's. you could hook 91 to port 4 and get a 22khz switch. hook the output of the dpp44 to one side of the 22 khz switch and hook 82 to the other side of it and run the out to the receiver. for 82 your setting would be 22khz on, port 1

UPDATE...
Sorry i doubted you dirtywill. i switched my sat 91 settings to port 1 with 22khz n and 91 popped right up on my screen. Still 82 isnt finding the hd channels. maybe some more testing will do the trick. my settings shouldnt be off though since its directly to port 4. HMMMM.... my sat 82 is showing up as 91 now. boooo

Thanks again