DP PLus Setup & Explain - ABA DSS

**grasshopper** · January 29th, 2007

Very good instruction.

**edwinsao** · January 29th, 2007

Quote:

Originally Posted by grasshopper

Very good instruction.

good job grass

**cdo_care** · January 29th, 2007

WOW! we to go grass.

**grasshopper** · February 7th, 2007

Help you to understand more how it works

**edwinsao** · February 7th, 2007

very good info grass

**cdo_care** · March 25th, 2007

Quote:

Originally Posted by grasshopper

Help you to understand more how it works

Grasshopper; Can i connect the 121 to the dish pro plus(LNB in?)

**grasshopper** · March 25th, 2007

Quote:

Originally Posted by cdo_care

Grasshopper; Can i connect the 121 to the dish pro plus(LNB in?)

I am not sure, but I did try 91 and it works

**BBMACk** · March 26th, 2007

i dont think what sat you point to matters...but it does have that 3x2 switch which makes it nice...i helped a friend get one up with 110/119/91..and we used no switch

hitman74 · April 28th, 2007

In the picture you have two receivers connected to the LNB ports 1 and 2. I have only 1 VS Ultra. Can this IRD be connected to this setup by itself?

**grasshopper** · April 28th, 2007

Each cable carry both signal for 110 & 119. no need to add any switches

rwhoadley · October 18th, 2007

WOW! all i can say is thank you. got it done,thanks again

Neroy · December 10th, 2007

I have looked all over the forums for an answer and could not find it. This is the set up I have at home with two subs. Can I remove a sub and use one of the cables with an FTA receiver and if so what setting would I use? Thanks in advance.

hitman74 · January 7th, 2008

Yes you can... both lines carry both sat's 110 and 119. Just go to the menu settings and set both 110 and 119 individually. You should scan both sat's separately and you don't have to specify disec settings. There isn't one being used...

jlee133541 · January 26th, 2008

Grasshopper,
Can I hook the reciever feeds into a DP34 and run two DP301' and my Visionsat out of my DP34 receiver ports. My understanding is that the Dish Plus LNB's and DP34 are true Disec. I know the LNB's have switches built in. I am picking up DN 110 and 119 on a Dish 500 through a DP34 to three DP301's. I just wanted to run the FTA off the switch until I Get the 31" dish with the Invacom Quad LNB, with a motor set up. I wanted to learn the box and then introduce the motorized dish.