zinwell wb68 6x8 multiswitch

[cmostank]

Originally Posted by tomcat01

the zinwell switch wb68 does not work with any dp lnbs the reason is dp has a internal switch it also will not work with any diqec switch either legacy dual lnbs straight to the zinwell ..

OK. I've got dp quad. Thanks for saving me more frustration. Can you point me in the right direction to run 6 receivers off of one Dish 500 with a Dp Quad?

[Landscapeman]

two dp34s. Look at the diagram in the stickys. It will show using a secound dp34 to hook up additional sats. I guess in your situation you can get one dp34 and hook up the two lines to the switch and run the other two from the lnb to the receivers. In that scenario would get a max of 6 outs, 4 switch/2 receiver. Good Luck

[Landscapeman]

I have came across something with this switch. When I connect it to two tvs. The one receiver(sonicview) will keep saying 110 and the secound tv(viewsat) will keep saying 119. Then with both receivers are on the sonicviews siganl quality will bounce from 0-74%. I have replaced the diaplexer with a brand new one and running two diffrent eagle aspens. I am now down to the switch or settings.