superdish problems with pansat 3500sd - ABA DSS

**storman666** · July 25th, 2008

This is a Friends set-up, has a dp34 in line on a superdish 105,going to a sd 3500,problem is he gets great signal and quality for about a minute then poof the screen says no signal and only about 35% level on there with 0 quality,any ideas fellas.Bad switch?Wrong antenna settings?he has dish pro antenna settings
22 khz off
disecq 1 for 119,
disecq 2 for 110

legacy sw none

any help would be appreciated

fordman01 · July 25th, 2008

Quote:

Originally Posted by storman666

This is a Friends set-up, has a dp34 in line on a superdish 105,going to a sd 3500,problem is he gets great signal and quality for about a minute then poof the screen says no signal and only about 35% level on there with 0 quality,any ideas fellas.Bad switch?Wrong antenna settings?he has dish pro antenna settings
22 khz off
disecq 1 for 119,
disecq 2 for 110

legacy sw none

any help would be appreciated

is he got ocs-dp in his setting???

**storman666** · July 25th, 2008

No ocs-dp bro,this is a 3500 sd,he has standard,dish-pro,univerval,single stack,etc.. no ocs-dp.

**storman666** · July 25th, 2008

We are going to try to by pass the dp 34 with a pansat disecq,he has the power off to the unit and is switching over the switch as we type,he really has no need for 105* anyhow.We just want to get 110-119,I had his box at my house over the weekend and had it running great,but when we hook it up over there it works fine for about 1 minute then goes to no signal.

**jayjay1972** · July 25th, 2008

is this a new setup? it could be a power problem. The box might not have enough juice for the switch and the lnbs

**storman666** · July 25th, 2008

He had this set-up for a while now,it started giving him problems about a week or 2 ago,you might be right on the juice man,maybe let him hook up another dp ird to the outputs of the dp 34 and see what happens.I'll give him a call and let him know.

**storman666** · July 25th, 2008

I'll let you guys know what we came up with.

**jayjay1972** · July 25th, 2008

hopefully thats the problem buddy. keep us posted

**storman666** · July 25th, 2008

OK we switched out the dp34 and fixed the 1 minute on only issue,now we are not getting all the channels,it is mixed on 110-119 also,some come in,some don't,at first I thought it was on the wrong diseqc # but that wasn't it either,this one has got me stumped, ****.The only other thing I know to do would be to switch out the dishes,I have an 500 I could give him,with dp plus lnb,that may work,as we are only shooting for 110-119 anyhow,we could still use the diseqc switch too,or for that matter the dp34 also.This is getting fun,I still can't help but wonder if we go back to the dp 34 and hook up a dp IRD for power that may do it jay jay,I will let him try this before we start switching dishes around,I am going over there tomorrow to figure it out with him,I'll keep you all posted.THANK YOU FELLAS!!!!

**storman666** · July 25th, 2008

WE got it,had to hook up a dish 500,2 dp lnbs to a 4x1 diseq,bam all channels,good to go.Thanks for the help,I got the superdish and will modify it to pick up some linear birds soon,I'll keep you guys informed.