ABA DSS - Free to Air Satellite TV Community - View Single Post

**HammerTime** · February 23rd, 2008

I have a DN1000.2 going to a SV8k. I want to add a DN500 pro and set them both up as the diagram above shows. Do I need the dp44 and dp34 switch when both of my dishes have built in switching. With my setup shouldn't I just send a feed from one of the outgoing ports of each dish to the encode switch and then to the receiver.

thanks for ur time guys

February 23rd, 2008	#8 (permalink)
HammerTime VIP Access Member Join Date: Oct 2007 Posts: 55 Thanks: 0 Thanked 9 Times in 8 Posts Rep Power: 2	Re: Multi sats setup by using DP switches I have a DN1000.2 going to a SV8k. I want to add a DN500 pro and set them both up as the diagram above shows. Do I need the dp44 and dp34 switch when both of my dishes have built in switching. With my setup shouldn't I just send a feed from one of the outgoing ports of each dish to the encode switch and then to the receiver. thanks for ur time guys