[sayyad]

Originally Posted by code9ster

OK here it is for viewsat owners, if you have locked up turn unit off from rear switch then disconnect sat cable and turn unit on and see if you can navigate, if not re install the bin and check again with sat cable off,if still locked use the factory file as a last resort only because you will have to scan and setup again when a new bin is out but this is the only way to bring it back if all other fails.some of you have been updating with usb if you unit is locked look for the loader for you unit and load factory file with the null cable it came with..

Found this on another site can someone confirm this!!

yes it is true !! read instructions first before download the latest software as stated in Download section