Ultra owners read here

[silver fox 8]

Originally Posted by fishsmacker

hey Carp I Loaded The 118 Fac File And Ended Up With --.. I Have It Back Up With Tomcats Fail Fix But It Still Wont Take Current Bin,lol I Love My Ultra I Hope That This File Did'nt Jack It Up Permanently,gh Warned Us About The Fac Files Now Are Basically All Trash,and I Now Know That He Is Correct.i Will Use Cw600p Until Vs Releases A New Fac File.sorry Dude But This Fac File Is Junk 2.

For Dn Antana Set Up Lnb On Type Dont Know What You Have It Is A Dish Pro 500 Set To Ocs-dp Frek 11250 22khz Off Or On Tp Freq 12224 System Settings Reg Tv 4.3 Channel Mode Normal New Trans 63 English An Local Town Options Closed Cap Off Tip On Auto Roll On Channel Name On Mapping On Pre Channel List That Should Get You Going Auto Scan 119 110

[chadroy]

hi guys I'm new here, I need to know where I can download the bin files. can I download it for free? cause when when I go to forums and try to download there it's asking me to upgrade my membership. can you help plz.

[Deerbay]

Hello fellow VS Ultra users

I am having a heck of time with my brand new VS2000 Ultra. I have the settings on DN 119 & 110 + BEV 91. My problem is when I upload the new files I also do a factory default then I re-install the channels using the auro then blind modes.

Well I end up many duplicate channels only to find some work some don't and some just keep saying "searching for channel"

My port setting are 1 for 119, 2 for 110 & 4 for 91

The trick is sometimes the setting allow some channels but when the system autto rolls everything gets shuffeld and those I was getting I don't?

I have tried new LNB's, new switches and even a new oval dish., same results

Can anyone pleeeease help.,

Thanks again and to everyone keep up all the great work you do

Deerbay

[bill of oz]

Originally Posted by Deerbay

Hello fellow VS Ultra users

I am having a heck of time with my brand new VS2000 Ultra. I have the settings on DN 119 & 110 + BEV 91. My problem is when I upload the new files I also do a factory default then I re-install the channels using the auro then blind modes.

Well I end up many duplicate channels only to find some work some don't and some just keep saying "searching for channel"

My port setting are 1 for 119, 2 for 110 & 4 for 91

The trick is sometimes the setting allow some channels but when the system autto rolls everything gets shuffeld and those I was getting I don't?

I have tried new LNB's, new switches and even a new oval dish., same results

Can anyone pleeeease help.,

Thanks again and to everyone keep up all the great work you do

Deerbay

use auto scan only then you wont get duplicates.....why are you doing a default before every new file??....there is no need for it

[chill dawg]

Originally Posted by bill of oz

use auto scan only then you wont get duplicates.....why are you doing a default before every new file??....there is no need for it

The duplicates are coming from your blind scan after you auto scan. You can go into menu and dump all channels you should see the trash can icon at the bottom of the screen, if your unsure then do the factory default reset antenna settings and then auto scan one sat at a time. Do this by turning off the lnb power to the sat your not scanning. Post all antenna settings and let us know what LNB you have.

[Deerbay]

Originally Posted by bill of oz

use auto scan only then you wont get duplicates.....why are you doing a default before every new file??....there is no need for it

Ok thanks, but everytime there is a new file out is staes to do a factory default??

OK thanks again

[ronnie fox]

hello yall. got good signal but no pic. on 119/7 channels."help '"

[drslav]

Originally Posted by Deerbay

Ok thanks, but everytime there is a new file out is staes to do a factory default??

OK thanks again

no. just put it on flash stick it in the receiver and follow instructions to load it in. that is all

[drslav]

Originally Posted by ronnie fox

hello yall. got good signal but no pic. on 119/7 channels."help '"

you need to start new thread in help section not hijack this one/.said that please post your settings and dish type. help will be on the way

[lupi29ta]

i HAVE A PROBLEM , ECO 7, I NEED TO PUT IT BACK ON 119 BECAUSE RIGHT NOW IS ON 360 OW PLEASE HELP ME

[lupi29ta]

I trying to set up my vs ultra and this is what i getting ./
27 echo star 7 (360.ow) instead of
27 echo star 7 (119 ow) how can i fix this problem please help me.

Thanks.

[amymillstone]

Hi:
Thank you! I think we just need to wait.