Ultra owners read here - Page 3 - ABA DSS

Lotto · April 19th, 2007

I am just a newbie; but i disagree that it is user error causing the problems. My Ultra was flashed with the early Feb BIN and all was fine. Then kaput it went just like the rest. From one channel change from a local channel to Cnn 200 on Dn. Went to autoroll and then nothin after i turned the stb off and then back on. I have checked twice and it is not a clone. Purchased from Viewsat online.

odunaiya · April 20th, 2007

Quote:

Originally Posted by 1965olds

O.K., jammin. I`ll take you out of the "trash talk", but not electra. What I was trying to say, is that no one came in to this hobby as ignorant to not only FTA, but also computers. But even with no backround in any of these fields, the mods, senior & super, and helpers, hell, even other newbies got me going . NEVER gave up, NEVER a harsh word, or snide remark, So electra, it`s not your box, it`s not this site, it for sure isn`t the advice given here, WHAT COULD IT BE ??

I am still not sure if we can blame all of the VS Ultra issue on users. I set mine up very well the first time. I only had questions about switches. Of cours I already ready relevant posts here which helped tremendously. What I dont understand is why the receiver will die after using it everyday for 5 days with no proble. We were watching a channel and suddenly it froze. Switched it off at the back and it will not come on again. I still like the convenience of VS Ultra but I am just wandering.........

coonhunter · April 20th, 2007

1965olds vary good hope electra can read

budter · December 3rd, 2007

Hi there. I need some help.

theoldman · December 3rd, 2007

attaboy. carpenter

**islandjet** · December 3rd, 2007

ty grasshopper and everyone else u guys are the best and this site is the one and only may u all be blessed always and happy hiolidays to all

**rsiu28** · December 3rd, 2007

HI MR. G.H. I am a new vip member in here. I just joined yesterday and I would like to ask you 3 questions. I have a viewsat ultra and I have echo 110 and 119 working fine. I have a dishpro500 and my questions is: Is there another satellite trasponder that I can scan? I see nimiq and all of this other satellites out there so I was just wondering if I could scan them without moving the dish so I can get more channels if that's possible. My second questions is what is the difference between a auto scan and a blind scan? Is one better than the other? Can I put a code or parental lock on the porn channels to prevent other family members from watching them?

**rsiu28** · December 3rd, 2007

HI MR. G.H. I am a new vip member in here. I just joined yesterday and I would like to ask you 3 questions. I have a viewsat ultra and I have echo 110 and 119 working fine. I have a dishpro500 and my questions is: Is there another satellite trasponder that I can scan? I see nimiq and all of this other satellites out there so I was just wondering if I could scan them without moving the dish so I can get more channels if that's possible. My second questions is what is the difference between a auto scan and a blind scan? Is one better than the other? Can I put a code or parental lock on the porn channels to prevent other family members from watching them?

mando2k7 · December 3rd, 2007

Rsiu28 you are replying to a very old post. Why don't you open a new thread instead of replying to an existing one..??
This only creates a lot of confusion with the uses , specially in these times when we have had a lot of ECM's from D**h.
Please open a new thread and make your questions and you will see that there are a lot of users and mods that will be helping you.
Regarding your questions:
1.- You have to add another dish to be able to get another sat out there.
2.- Autoscan is recomended if you have a Viewsat. Blind scan is used in old receivers not these ones.
3.- You can a code to your receiver and it will prevent automatically your porn channels from being viewed by others. Please make sure you don't give the code to anyone.
You have to read , all questions are already answered in a lot of ways and posts in the Forum.
Regards....

Litha Moon · December 3rd, 2007

I'm down and out and have a viewsat ultra 2000 that i have not had a problem with until now!!! Anybody please reply and tell what is happening with the nimiq situation.

**Lancer68** · December 3rd, 2007

I guess i got lucky,sats 91 110 and 119 are all good so far.Thanks for the info and nice to have this quick chat.Lancer68(viewsat ultra)

mrmeatpuppet_4u · December 3rd, 2007

is ther a fix for veisat platninum and where do i get it if im not a vip member

simsim31 · December 3rd, 2007

vs ultra working fine thx

**monoxid** · December 8th, 2007

I have two Ultra's and one Extrem and there all great receivers. The big advantage of the Ultra's is the USB port.

MrGuydoune · December 8th, 2007

Hi I'm new 2 this and would like 2 know how 2 get the code i hate 2 miss the fight

hickins · December 8th, 2007

Guys,

I really appreciate some help for a newbie, I got vs2000 ultra, and today I got bell channels this morning and now I can't watch them. do I need another file to upgrade the receiver? and if I am not asking much, where to get those files?

I really appreciate anyone would give me a hand here.

Hickins

perrycards · December 8th, 2007

putting keys won't help you,you must wait till for the new bin.

**wishpalfrey** · December 8th, 2007

Send It To Me Fool

Outlaw'd · December 9th, 2007

All is fine here, Ultra is a great machine!!

dzcowboy · December 10th, 2007

hey there,this farm boy asking for a moment of someones time.Have a view sat ultra that will take a pgm but says fail or no channel new from box,would appreciate asome help please,also a view sat 2000 that is pooched,only light on is the optical cable.lol.myself i dohave a sonicview hd that is a jem and works great but would like to know why my other 2 pooched? thanks for your time dz....