go to your antt setting screen. when you on lets sat nimiq 1 go down to your switch opions and change the poets until you get S and Q. that will be the port that bird is on. then go and do it for the other two.
i have viewsat ultra dn and bev i did factory default but i don`t know wich diseqc it should be on echo star3x and on nimiq 1,3
Maybe someone that has expericane with this unit will help. Until then if you go to the viewsat ultra sub fourms and do some reading all your questions can be answered there
No the PFTAUSW-080104U-1 odes both but they had (have) uissues with the latestn files and BEV so they put out one that corrected the DN side to hold some of the people over then they continued to work on the BEV stuff and released a new fix that included the BEV stuff.
the Diseqc switch is a connector that allows multiple LNB's to be attaced to one receiver so if you have one then toggle between 1-4 to see whch port is connected to the sat you are looking for.
NEXT TIME COULD YOU PLEASE POST IN THE PROPER SECTION WHICH WOULD BE THE VIEWSAT ULTRA HELP SECTION. YOU ARE NOW IN THE RECEIVER REVIEWS SECTION. NOT GOOD... I WILL NOW MOVE THIS THREAD THERE.
THANKS.
.
Quote:
Originally Posted by Annamarie
i have viewsat ultra dn and bev i did factory default but i don`t know wich diseqc it should be on echo star3x and on nimiq 1,3
NOTICE: Any information contained in this message is purely educational in nature and should not be considered professional advice and any use is at your own peril.
i have vs ultra up & runninig. in order to help u need more info.you have dn & b3v? latest bin?? how you load the bin?? etc
yes my vs ultra is up and i have dn and bv but the echo star3 is not coming should i put dn and bev on the same diseqs or different port the only is working is bev but not dish should i delete the satellite and install it again or not i load the bin through usb
need help with set up
8000hd/p
9000 HD V2 & ULTRA & Xtreme 
Linear Mode
