adviser requires

[Zoso]

i installed a new dish along with an adaptor which hold the 82, 91 110, 119 lnb's
it also has 2 heavy duty diseqc 2.0 switches which are each 4-1, input towards 2 seperate veiwsat ultra's. each was expected to have both BEV and DN.
But, can't get it to behave properly, also can't get it to behave consistantly.
check all lines.....ok......diseqc swiched......ok......lnb's.......ok.
niether can get it all....but, only one side othe the other. right now....complete DN. prior.....complete BEV.......but, never both at the same time........screws up both veiwsats.
please help. any suggestions will be greatly appreciated.
thanx!!

[aladin 13]

u have to do a factory reset and try to rescan all of them together when u go to blind scan option check all of them

[Zoso]

yes, tried that a few times, each time acting differently. never the same way twice. never both BEV or DN at the same time on either viewsat.

[chicoluv]

Do not blind scan stb .auto scan is what u have to do .

[bigevil69]

Originally Posted by Zoso

i installed a new dish along with an adaptor which hold the 82, 91 110, 119 lnb's
it also has 2 heavy duty diseqc 2.0 switches which are each 4-1, input towards 2 seperate veiwsat ultra's. each was expected to have both BEV and DN.
But, can't get it to behave properly, also can't get it to behave consistantly.
check all lines.....ok......diseqc swiched......ok......lnb's.......ok.
niether can get it all....but, only one side othe the other. right now....complete DN. prior.....complete BEV.......but, never both at the same time........screws up both veiwsats.
please help. any suggestions will be greatly appreciated.
thanx!!

tell us how cables are hooked up from lnb to switch