I don't know what I have messed up on my satelite, but some of my channels are not coming in and it says searching signal. Channels 106, 107, 108, 110, 112, 114, 116, 118, 122, 127, 128,130,131, 135, 138, 160, 162, 166,168,170, these are just a few that do not come in. Can someone please help me get this fixed..... Thank You
you may need to align your dish slightly, the quality may be low on some tp's.
is it raining there, raindrops or even mist on my lnb's affect the quality sometimes to the point I lose signal altogether.
__________________
were testing,
and loving it!
be a responsible member. read, search, then post... you'll love the results!
It has been like this since the new fix and before the new fix came out I did an auto scan and a blind scan. Would this have anything to do with it or do you still think that the dish is out of wack? Thanks so much for your help.
could be both, dont suggest blind scan.
you can do a factory default, re enter your antenna settings and do a channel scan.
if your missing some, maybe your dish has moved a slight bit or some other obstruction is blocking the signal slightly.
The Following User Says Thank You to hazwis For This Useful Post:
the best way to scan is with autoscan, blind scan will almost always double channels. here is how you do it:
how to autoscan:
1) press menu- go to installation- then autoscan.
2) select the sats you want to scan from the list.
3)press the OK button to start the scan.
as each tp scans you should see the # of channels going up.
__________________
were testing,
and loving it!
be a responsible member. read, search, then post... you'll love the results!
i have had this problem with several units. my fix was to default 2 or 3 times, rebooting each time. then reload the update software, reset all sats and other settings. autoscan one sat at a time and reboot.
i hope this helps, good luck!
__________________ Help yourself by helping others...READ!
If I have helped you please press the THANKS button.
Linear Mode
