that doesnt mean ecm, it means no quality or signal, check this out:
quality and signal
quality- this bar indicates the signal the dish is picking up from the sat.
eg; echostar 7, nimic 1,3 etc... if your dish is not aligned you will not have
quality but you could have signal.
signal- this bar tells you the status of your connections including your coax,
all ends on the coax, and your switch. if you have no signal you cant pick up quality so both will read 0.
check all connections, the switch, and dish alignment, one of those should help.
be aware that storms or raindrops on the lnb will also affect quality and severe problems will cause the "searching signal" message.
__________________
were testing,
and loving it!
be a responsible member. read, search, then post... you'll love the results!
searching signal
Hi every body mi dish is only on (searching signal).
Linear Mode
